Analisis cycle time proses perakitan senjata di PT Pindad (Persero)
DOI:
https://doi.org/10.22441/oe.2021.v13.i2.015Kata Kunci:
keseimbangan lini perakitan, waktu siklus, manufaktur, industri pertahanan, manajemen operasiAbstrak
This paper aims to analyze the cycle time of the assembly line of one of the weapons products at PT. Pindad (Persero) and to explore the effective methods to improve its performance. The method used is a quantitative analysis of assembly data involving 155 components and 56 tasks distributed over 43 work stations, accompanied by document analysis, especially on scientific literature, to elaborate various appropriate methods to become solutions to the problems encountered. The results show that almost all workstations had a cycle time greater than the takt time. It is also known that there is an imbalance of existing workstations, with the lightest workload lasting 67 seconds while the largest workload lasting 253 seconds. The results of the elaboration of the literature show that several potential methods can provide solutions to the problems encountered by considering the characteristics of the assembly line with a straight-line configuration. This study contributes to the literature by analyzing cycle times and assembly line balances in the defense industry relatively rarely studied in Indonesia.
Unduhan
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
