Models of supply chain management in the efforts to develop the banyumasan batik industry
DOI:
https://doi.org/10.22441/oe.2023.v15.i2.086Kata Kunci:
inventory, raw material, min-max stock, safety stockAbstrak
Inventory of raw materials is one of the crucial problems in the company. Errors in determining the size of raw material inventory is very influential for the smooth production of the company. PT Semen Bosowa Maros is a private company that focuses on cement production. This study aims to avoid excess and shortage of raw materials by calculating the amount of raw material inventory at PT Semen Bosowa Maros. This study uses the Min-Max Stock method. The research data was obtained from the company's annual data with related parties. The results of the study obtained safety stock values of Silica Sand 166.46 ton’s, Gypsum 1482.96 ton’s, Fly Ash 33.71 ton’s, and Trass 30.76 ton’s. Then, the minimum inventory calculation is carried out, it is known that the minimum inventory results are found in Trass raw materials of 260.18 ton’s while the results for maximum inventory are in Gypsum of 22117.18 ton’s. After calculating the min-max, an order policy can be obtained for each material, Silica Sand 1074.85 ton’s, Gypsum 9575.63 ton’s, Fly Ash 217.68 ton’s, and Trass 198.65 ton’s.
Unduhan
Referensi
Indrajit, Richardus Eko. Richardus Djokopranoto. 2005. Strategi Manajemen Pembelian dan Supply Chain. Penerbit. PT Gramedia Widiasarana Indonesia, Jakarta.
Indrajit, Richardus Eko. 2006. Konsep Manajeman Supply Chain: Cara Baru Memandang Mata Rantai Penyediaan Barang. Penerbit. PT Gramedia Widiasarana Indonesia, Jakarta.
Kusumawati, Endar. 2004. Analisis Faktor-Faktor Yang Mempengaruhi Kinerja Ekspor UKM Dengan Lingkungan Sebagai Variabel Moderating (Studi Kasus pada Industri Furniture di Kabupaten Jepara. Undip.ac.id.
Marcely Susanty, Tri Wahyu Ningsih, Muhammad Faizin Rissa. 2019. Analysis of Customer Satisfaction with Importance Performance Analysis (IPA) Method in One of the Banking Industries. International Journal of Innovative Science and Research Technology. Vol.4, 421-425
Mulyono, F. 2011. Demand Chain Management: Supply Chain Management + Orientasi Pasar. Jurnal Administrasi Bisnis. Vol 7, No. 1, Fisip Unpar. Hal 59-72
Probowati, A. 2011. Strategi Pemilihan Supplier Dalam Supply Chain Management Pada Bisnis Ritel. Segmen Jurnal Manajemen dan Bisnis. No 1. Janu. 65- 82.
Putri, C.F. 2012. Pemilihan Supplier Bahan Baku Kertas Dengan Model QCDFR dan Analytical Hierarchy Process (AHP). Jurnal Widya Teknika. Vol. 20. No. 20, Oktober 2012. Hal 32-38.
Retnawati, Berta Bekti. Agustine Eva Maria Soekesi. 2010. Model Supply Chain Produk Usaha Kecil (Studi Kasus Pada Kampoeng Batik Laweyan Surakarta). Universitas Katolik Soegijapranata. Eprints.unika.ac.id
Rahmasari, L. 2011. Pengaruh Supply Chain Terhadap Kinerja Perusahaan dan Keunggulan Bersaing (Studi Kasus pada Industri Kreatif di Provinsi Jawa Tengah). Majalah Ilmiah Informatika.Vol. 2 No. 3, September 2011. Hal 89-103.
Saaty, TL. 2000. How to Make a Decision: The Analytic Hierarchy process. European Journal Of Operation Research.Vol. 48 (1), 9-26.
Soebagiyo, Daryono. 2008. Analisis Kompetensi Produk Unggulan Daerah Pada Batik Tulisdan Cap Solo Di DATI II Kota Surakarta. Jurnal Ekonomi Pembangunan. Vol. 9, No. 2, Desember. ums.ac.id (28-3-2014).
Soekesi, A.E.M. Retnawati, B.B. 2010. Model Supply Chain Produk Usaha Kecil (Studi Kasus Pada Kampoeng Batik Laweyan Surakarta). Jurnal Dinamika Sosial Ekonomi. Vol. 6. No. 2. Hal 210-220.
Sudantoko, D. 2010. Pengembangan Industri Batik Skala Kecil Di Kabupaten Dan Kota Pekalongan Dengan Pendekatan Analysis Hierarchy Process (AHP). Jurnal Prestasi Vol. 6. No.1- Juni 2010. P3M STIE Bank BPD Jateng. Hal 1-17.
Sartika, I. 2009. Pengembangan Model Rantai Pasok Produk Mudah Rusak Dengan Mempertimbangkan Kualitas. Ipdn.ac.id.
Sujadi. Edi Priyono. Fereshti N.D. 2008. Membangun Sinergi Bagi Pengembangan Produk UKM Berbasis Ekspor DI Klaster UKM, Serenan, Klaten. Seminar Nasional Aplikasi Sains dan Teknologi. IST AKPRIND Yogjakarta. Repository.akprind.ac.id (5-4-2014).
Utomo, D. 2012. Strategi Pendekatan Supply Chain Management Pada Proses Produksi Dan Saluran Distribusi Terhadap Agroindustri Mangga Di Kabupaten Probolinggo. Jurnal yudharta.ac.id.
Weiss, S., Proudler, I. K., Coutts, F. K., & Khattak, F. A. (2023). Eigenvalue Decomposition of a Parahermitian Matrix: Extraction of Analytic Eigenvectors. IEEE Transactions on Signal Processing, 71(1), 1642–1656. https://doi.org/10.1109/TSP.2023.3269664
Widayati, Endang P. 2012. Analisis Fleksibilitas Supply Chain Perusahaan Rokok PR Lee Choir di Sidoarjo. Jurnal Tekmapro. Ejournal.upnjatim.ac.id. (5-4-2014).
Wulandari, N. 2014. Perancangan Sistem Pendukung Keputusan Pemilihan Supplier di PT. Alfindo Dengan Metode Analytical Hierarchy Process (AHP). Jurnal Sistem Informasi. Vol. 1. No. 1. Hal 4-7.
Yusuf, M. 2009. Pendekatan Analytic Hierarchy Process dan Goal Programming untuk Menentukan Model Pemasok. Jurnal Teknologi. Vol. 2. No. 2 Desember 2009. Hal 137-142.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
