Menurunkan angka rework pada proses burritori di line injection moulding dengan metode PDCA
DOI:
https://doi.org/10.22441/oe.v11.2.2019.030Kata Kunci:
Mould, Kualitas produk, PDCAAbstrak
Case heater & case blower is one of component product used to make car air conditioner. The function of case heater & case blower is as a holder for various car A/C components. Case heater & case blower is produced with a mould with the support of plastic injection machine. The process is to inject the material melt into the mould. When the product comes out of the machine, it checks the product to remove the burr on the product. Burr is a minor type of defect in the product, meaning the product can still be said OK but an additional process should be done to clean the product. Additional process is called burritori, which is a process to clean burr by using cutter. Allowed burr standard of 0.1 ~ 0.3 mm, above it must be done burritori process. With the company's slogan of QUALITY FIRST, the quality of product is very important. Therefore the burritory process can not be eliminated. With the burritory process, so have additional man power to do that activity. Actually unneeded additional man power to do burritori process if product out of mould in good condition that there is no burr on product. This study aims to improve product quality by addressing the product burr problem after being out of mold. So with the increased product quality that is the absence of burr, then the burritory process previously done no longer need to be done because the product comes out of the mold already good quality (no burr). In this research using PDCA method in solving existing problems.Unduhan
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
