Analisis Kecelakaan Kerja Dalam Upaya Menurunkan Kecelakaan Kerja Menggunakan Metode Fault Tree Analysis Di UMKM Kopi 1000 Nurhidayah
DOI:
https://doi.org/10.22441/oe.2022.v14.i2.053Kata Kunci:
accidents, productivity, fault tree analysisAbstrak
Work accidents are one of the most common problems in companies where these accidents often occur in workers and cause severe injuries at the physical level of workers. UMKM Kopi 1000 Nurhidayah in carrying out activities cannot avoid problems that will occur, the purpose of this study is to find out the causes of work accidents that occur and provide solutions to the causes of these events. This type of research is qualitative and quantitative with primary and secondary data using the Fault Tree Analysis (FTA) method. Work accidents in UMKM Kopi 1000 Nurhidayah occur due to human factors, equipment factors, work procedures, and environmental factors. The types of accidents are falls, pinched hands, earaches, backaches, shortness of breath, tightness, eye pain, and blistered hands. The highest cause of accidents was coffee slime with a probability of 7.74% and the lowest was a work shirt with holes and broken glasses with a probability of 0.92%. The solution to the cause of work accidents is to prepare yourself physically and mentally, by periodically replacing damaged personal protective equipment to minimize the impact of work accidents, as well as the need to conduct training on safety standardization, and always maintain a clean work environment.
Unduhan
Referensi
Aini, R. Q. (2021). Work Accident Analysis to Increase Work Productivity Using Failure Mode and Effect Analysis (FMEA) and Fault Tree Analysis (FTA) Methods at PT . XYZ. Budapest International Research and Critics Institute-Journal (BIRCI-Journal), 5(2), 14680–14695. https://doi.org/10.33258/birci.v5i2.5345
Arman, U. D., Melasari, J., & Suwanda, R. (2022). Identifikasi Penyebab Kecelakaan Kerja Konstruksi Menggunakan Accident Root Cause Tracing Model (ARCTM) dan Fault Tree Analysis (FTA). Cantilever, 11(1), 17–28. https://doi.org/10.35139/cantilever.v11i1.112
Asih, I., Setiawan, I., Hernadewita, H., & Hendra, H. (2022). Effects of ergonomics intervention on work accidents in the construction sector and their effect on productivity. Jurnal Sistem Dan Manajemen Industr, 6(1), 45–55. https://doi.org/http://dx.doi.org/10.30656/jsmi.v6i1.4242
Darmawan, D., Puspita, A. D., & Santosa, G. (2022). Analisis Keselamatan Dan Kesehatan Kerja Dengan Pendekatan Hazard Identification Risk Assessment and Fault Tree Analysis Pada PT. WGI. Journal of Industrial and Systems Optimization, 5(1), 10–17. https://doi.org/10.51804/jiso.v5i1.10-17
Ekoanindiyo, F. A., Yohanes, A., Prihastono, E., & Hayati, E. N. (2021). Pendekatan Metode Fault Tree Analysis Dalam Kesehatan Dan Keselamatan Kerja Serta Pengaruhnya Terhadap Produktifitas. Jurnal Rekayasa Sistem Industri, 7(1), 20–25. https://doi.org/10.33884/jrsi.v7i1.4456
Fauziah, S. R., Renosori, P., & Selamat. (2022). Identifikasi Penyebab Terjadinya Kecacatan pada Produk Induktor Toroidal dengan Menggunakan Metode Fault Tree Analysis (FTA) di CV. Cipta Karya Mandiri. Bandung Conference Series: Industrial Engineering Science, 2(1), 91–99. https://doi.org/10.29313/bcsies.v2i1.1619
Haslindah, A., Idrus, I., Rosliadi, R., & Irsyad, A. (2019). Analisa Penerapan Progam Keselamatan Kerja Dalam Usaha Meningkatkan Produktivitas Kerja Dengan Pendekatan Fault Tree Analysis. ILTEK : Jurnal Teknologi, 13(02), 1971–1975. https://doi.org/10.47398/iltek.v13i02.371
Kurniawan, R. A., & Rizqi, A. W. (2022). Analisa Manajemen Resiko Dengan Metode Fault Three Analisys (FTA) System Compressor Air Minum Dalam Kemasan PT. Swabina Gatra. Jurnal Teknovasi, 9(1), 1–9. https://doi.org/10.55445/teknovasi.v9i1.657
Putri, D. I., & Ngatilah, Y. (2021). Analisis Kualitas Produk Console Table dengan Menggunakan Metode Fault Tree Analysis (FTA) dan Failure Mode and Effect Analysis (FMEA) di PT. Romi Violeta Sidoarjo. Juminten : Jurnal Manajemen Industri Dan Teknologi, 2(5), 97–108. https://doi.org/10.33005/juminten.v2i5.322
Rahmanto, I., & Hamdy, M. I. (2022). Analisa Resiko Kecelakaan Kerja Karawang Menggunakan Metode Hazard and Operability (HAZOP) di PT PJB Services PLTU Tembilahan. Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 1(2), 53–60.
Sari, S., Puspita, A., Sulistiyo, T., Faruq, M. A., & Bimantyo, R. (2022). Analisis Potensi Bahaya Serta Rekomendasi Perbaikan Dengan Metode HAZOP Dan 5S (Studi Kasus: Percetakan PT. XYZ). MATRIX : Jurnal Manajemen & Teknik Industri - Produksi, 22(2), 139–148. https://doi.org/10.350587/Matrik v22i2.3070
Septania, L. A. D., & Deswindi. (2022). Quality Control of Frozen Fish Based on Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA) Methods. International Journal of Education, Information Technology and Others (IJEIT), 5(2), 86–92. https://doi.org/10.5281/zenodo.6585742
Septianto, A., & Wardhani, A. R. (2020). Penerapan Analisis Resiko Terhadap Kesehatan Dan Keselamatan Kerja(K3) Pada PT. X. Jurnal Aplikasi Dan Inovasi Ipteks Soliditas, 3(1), 6–11. https://doi.org/10.31328/js.v3i1.1385
Setiawan, I., Aldrianto, N. F., Arifin, D., Fipiana, W. I., & Lusia, V. (2022). The effect of occupational health and safety on the performance of employee of Tire Industry Indonesia. Journal Industrial Servicess, 7(2), 253–258. https://doi.org/10.36055/jiss.v7i2.14034
Suseno, S. I. K. (2022). Pengendalian Kualitas Cacat Produk Tas Kulit Dengan Metode Failure Mode and Effect Analysis (FMEA) dan Fault Tree Analysis (FTA) di PT. Mandiri Jogja Internasional. Jurnal Cakrawala Ilmiah, 1(6), 1307–1320. https://doi.org/https://bajangjournal.com/index.php/JCI/article/view/1131
Syahabuddin, A., & Zulziar, M. (2021). Analisis Defect Produk Viro Core Collection dengan Metode Fault Tree Analysis, Analisis Faktor dan Perbandingan. Jurnal INTECH, 7(1), 23–29. https://doi.org/10.30656/intech.v7i1.2695
Triswandana, I. W. G. E., & Armaeni, N. K. (2020). Penilaian Risiko K3 Konstruksi Dengan Metode HIRARC. Ukarst : Universitas Kadiri Riset Teknik Sipil, 4(1), 96–108. https://doi.org/10.30737/ukarst.v3i2
Wahid, M., & Hasibuan, S. (2021). Performance evaluation of after-sales service partners in the power tools industry. Jurnal Sistem Dan Manajemen Industri, 5(2), 105–114. https://doi.org/10.30656/jsmi.v5i2.3985
Widodo, D. S. (2021). Keselamatan dan Kesehatan Kerja (K3): Manajemen dan Implementasi K3 di Tempat Kerja (1st ed.). Penebar Media Pustaka. https://books.google.co.id/books/about/Keselamatan_dan_Kesehatan_Kerja_Manajeme.html?id=1CEgEAAAQBAJ&redir_esc=y
Zazilah, A. N., & Rusmawan, P. N. (2021). Analisis Defect Gula Semut Dengan Metode Fault Tree Analysis Sebagai Industri Kreatif. Seminar Nasional Terapan Riset Inovatif (SENTRINOV) Ke-6, 7(2), 345–353.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
