ANALIS NUMERIK SIFAT MEKANIK BAHAN ABS & KOMPOSIT SERAT BAMBU APLIKASI PADA KOMPONEN ADJUSTER SEAT MOBIL
DOI:
https://doi.org/10.22441/pasti.2022.v16i1.002Keywords:
Adjuster seat, komposit bambu, autodesk fusion 360, material ABSAbstract
Komposit merupakan material yang tersusun atas campuran dua atau lebih material dengan sifat kimia dan fisika berbeda, dan menghasilkan sebuah material baru yang memiliki sifat-sifat berbeda dari material penyusunnya. Bambu merupakan salah satu serat alam yang dapat digunakan untuk bahan reinforcement pada bahan polymer untuk menjadi material komposit polimer. Penelitian ini bertujuan untuk menganalisis sifat-sifat mekanik secara numerik bahan ABS yang digunakan pada komponen adjuster seat mobil terhadap komposit serat bambu. Penelitian dilakukan menggunakan software Autodesk fusion 360 dengan memvariasikan pembebanan sebesar 50, 75 dan 100 N untuk simulasi Von Misses, 1st principle dan 3rd principle, displacement. Dari hasil analisis diketahui bahwa pada simulasi discplacement material komposit bambu memiliki nilai deformasi lebih tinggi yaitu 0,4 mm berbanding material akrilonitril butadiene stiren (ABS) sebesar 0,3 mm pada pembebanan 100N. Material komposit serat bambu dapat digunakan sebagai material pengganti material utama yaitu Akrilonitril butadiene stiren (ABS).Downloads
References
Akampumuza, O., Wambua, P. M., Ahmed, A., Li, W., & Qin, X. H. (2017). Review of the applications of biocomposites in the automotive industry. Polymer Composites, 38(11), 2553-2569.
Autodesk (2021). Fusion 360 Features. Tersedia pada: https://www.autodesk.com/products/fusion- 360/Features.
Autodesk (2021). Simulation 360. Tersedia pada: https://knowledge.autodesk.com/search-result/caas/vhelp/help-dev-autodesk- com/v/Simulation-360/enu/2013/Help/0016-Getting- 16/0074-Autodesk74/0075- LinearS75.html.
Das, S. (2001). The Cost of Automotive Polymer Composites: A Review and Assessment of DOE's Light Weight Materials Composites Research (p. 47). Oak Ridge, Tennessee, USA: Oak Ridge National Laboratory.
Ezekwem, D. (2016). Composite Materials Literature review for Car bumber.
Hanada, K., Djamil, S., & Lubis, S. Y.(2021). Sifat Tarik Dan Sifat Lentur Pada Body Motor Komposit Lamina Dengan Perlakuan Alkali. POROS, 17(1), 16-25.
Mardiyati, S., Raden, R., & Ikhsan, P. (2016). Sifat mekanik komposit polipropilena berpenguat serat Sansevieria unidirectional. Jurnal Mesin, 25(2), 73-82.
Masdani, M., & Dharta, Y. (2018). Potensi Pengembangan Komposit Berpenguat Serat Kulit Gaharu Sebagai Material Pengganti Fiberglass Pada Pembuatan Dashboard. Manutech: Jurnal Teknologi Manufaktur, 10(01), 33-38.
Nurudin, A. (2011). Potensi pengembangan komposit berpenguat serat kulit Waru (Hibiscus Tiliaceus) kontinyu laminat sebagai material pengganti fiberglass pada pembuatan lambung kapal. INFO-TEKNIK, 12(2), 1-9.
Rohmawati, P. A., Yushardi, Y., & Gani, A. A. (2017). Karakterisasi Sifat Mekanik Bahan Komposit Ramah Lingkungan Hasil Sintesis Dari Serat Lidah Mertua (Sanseviera Trifasciata) Dan Selulosa Bakteri. Jurnal Pembelajaran Fisika, 6(4), 364-370.
Subyakto, S., & Gopar, M. (2009). Tinjauan Penelitian Terkini tentang Pemanfaatan Komposit Serat Alam untuk Komponen Otomotif Review on current research on utilization of natural fiber composites for automotive components. Jurnal Ilmu dan Teknologi Kayu Tropis, 7(2), 92-97.
Sulaiman, M., & Rahmat, M. H. (2018). Kajian potensi pengembangan material komposit polimer dengan serat alam untuk produk otomotif. In Prosiding Seminar Nasional Teknik Mesin.
Taufik, I. (2012). Perilaku Creep pada Komposit Polyester dengan Serat Kulit Bambu Apus (Gigantochloa Apus (JA & JH Schultes) Kurz). MECHANICAL, 3(2).
Verma, D., & Senal, I. (2019). Natural fiber-reinforced polymer composites: Feasibiliy study for sustainable automotive industries. In Biomass, biopolymer-based materials, and bioenergy (pp. 103-122). Woodhead Publishing.
Zariatin, D. L., Ravizqi, M. A., & Siregar, A. S. (2020). Analisis Pengaruh Waktu Perebusan Serat Bambu Apus (Gigantochloa Apus) Pada Larutan NaOH Terhadap Beban Tarik. In Prosiding Seminar Rekayasa Teknologi (SemResTek) (pp. TTG51-TTG57).
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
