ANALISIS POSTUR KERJA DAN MANUAL MATERIAL HANDLING PADA AKTIVITAS PEMINDAHAN MATERIAL DI BENGKEL BUBUT BP
DOI:
https://doi.org/10.22441/pasti.2022.v16i2.001Keywords:
Musculoskeletal disorders, Nordic Body Map, REBA, MAC ToolAbstract
Aktivitas pemindahan material pada bengkel bubut BP dilakukan secara manual oleh 2 pekerja. Kegiatan tersebut menimbulkan musculoskeletal disorders yang tersaji pada hasil kuesioner Nordic Body Map. Maka dari itu, diperlukanlah penelitian lebih lanjut untuk mengetahui seberapa besar tingkat risiko yang berkaitan dengan postur kerja dan manual material handling agar pekerja tidak mengalami cedera lebih lanjut dan aktivitas menjadi aman karena memiliki tingkat risiko musculoskeletal disorders yang rendah. Analisis mengenai postur kerja menggunakan metode REBA (Rapid Entire Body Assessment) dan manual handling menggunakan Manual Handling Assessment Charts (MAC Tool). Hasilnya adalah kedua operator memiliki postur kerja dan manual handling dengan tingkat risiko cedera yang tinggi. Usulan perbaikan yang mampu diimplementasikan berkaitan dengan postur tubuh adalah perbaikan postur kerja dengan memperhatikan nilai REBA. Perbaikan juga berkaitan dengan manual material handling berupa mereduksi jarak perpindahan, mengeliminasi rintangan rute perpindahan, dan memperbaiki pencahayaan lingkungan kerja.Downloads
References
Anggraini, D. & Bati, N. (2016). Analisa Postur Kerja dengan Nordic Body Map & REBA pada Teknisi Painting Di PT. Jakarta Teknologi Utama Motor Pekanbaru. Jurnal Photon, 7(1), 87-97.
Anonim. (2019). Manual Handling Assessment Charts (the MAC tool). Tersedia pada: https://www.hse.gov.uk/pubns/indg383.htm pada tanggal 25 April 2022.
Anonim. (2020). Work-Related Musculoskeletal Disorders & Ergonomic. Tersedia pada: https://www.cdc.gov/workplacehealthpromotion/health-strategies/musculoskeletal-disorders/index.html#:~:text=Musculoskeletal%20disorders%20(MSD)%20are%20injuries,to%20the%20condition%3B%20and%2For pada tanggal 25 April 2022.
Bridger. R.S. (2003). Introduction to Ergonomics. New York: Taylor & Francis e-Library.
Dul, J. & Weerdmeester B. (2003). Ergonomics for Beginners. New York: Taylor & Francis e-Library.
Evadarianto, N. & Dwiyanti, E. (2017). Postur Kerja Dengan Keluhan Musculoskeletal Disorders pada Pekerja Manual Handling Bagian Rolling Mill. The Indonesian Journal of Occupational Safety and Health, 6(1), 97-106.
Helander, M. (2006). A Guide to Human Factors and Ergonomics. USA: Taylor & Francis Group.
Lubis, S. (2018). Analisis Faktor Risiko Ergonomi terhadap Keluhan Musculoskeletal Disorders (MSDs) pada Teller Bank. Jurnal Ilmu Kesehatan Masyarakat, 7(2), 63-73.
Setiorini, A., Musyarofah, S., Mushidah, & Widjasena, B. (2019). Analisis Postur Kerja dengan Metode REBA dan Gambaran Keluhan Subjektif Musculoskeletal Disorders (MSDs). Jurnal Kesehatan, No. 1, 24-32.
Shobur, S., Maksuk & Sari, F. (2019). Faktor Risiko Musculoskeletal Disorders (MSDs) pada Pekerja Tenun Ikat di Kelurahan Tuan Kentang Kota Palembang. Jurnal Medikes (Media Informasi Kesehatan), 6(2), 113-122.
Sulaiman, F. & Sari, P.S. (2016). Analisis Postur Kerja Pekerja Proses Pengesahan Batu Akik dengan Menggunakan Metode REBA. Jurnal Teknovasi, 3(1), 16-25.
Tiogana, V. & Hartono, N. (2020). Analisis Postur Kerja dengan Menggunakan REBA dan RULA di PT X. Journal of Integrated System, 3(1), 9-25.
Wahyudi, P. & Hariyono, W. (2017). Kesesuaian Manual Assessment Chart Tool Dan NIOSH Lifting Equation Dalam Identifikasi Keluhan Muskuloskeletal Pekerja Industri. Berita Kedokteran Masyarakat, 33(8), 377-382.
Wijaya, K. (2019). Identifikasi Risiko Ergonomi dengan Metode Nordic Body Map Terhadap Pekerja Konveksi Sablon Baju. Seminar dan Konferensi Nasional IDEC.
Yogisutanti, G., Habeahan, D.N. & Suhat. (2020). Faktor Risiko Keluhan Musculoskeletal pada Tukang Fotokopi di Kota Cimahi. Media Kesehatan Masyarakat Indonesia, 16(3), 355-366.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
