Penentuan Waktu Baku Optimal dan Analisis Beban Kerja Pada Bagian Produksi Udang PCDTO-IQF di PT. Indo American Seafoods
DOI:
https://doi.org/10.22441/pasti.2023.v17i2.002Kata Kunci:
Waktu Standar, Beban Kerja, Jumlah Tenaga Optimal, Stopwatch Time Study, Workload AnalysisAbstrak
Faktor tenaga kerja, waktu kerja dan beban kerja berpengaruh terhadap produktivitas suatu perusahaan industri. Berdasarkan isu tersebut maka penelitian ini bertujuan untuk menetapkan waktu standar, beban kerja pekerja dan jumlah pekerja optimal pada bagian produksi Udang PCDTO-IQF di PT. Indo American Seafoods dengan menggunakan metode Stopwatch Time Study. Data penelitian diperoleh secara langsung dengan cara mengukur waktu kerja pada bagian produksi menggunakan instrumen stopwatch. Hasil penelitian mendapatkan total waktu standar yang dibutuhkan untuk produksi Udang PCDTO-IQF sebesar 17.089,83 detik atau 4,75 jam. Beban kerja untuk proses produksi memiliki 29 proses, terdapat 11 proses memiliki beban kerja lebih dari 100% atau beban kerja normal, selebihnya memiliki beban kerja normal. Berdasarkan temuan tersebut maka direkomendasikan agar perusahaan melakukan penambahan jumlah pekerja untuk beban kerja berlebih serta melakukan pengurangan ataupun pemindahan tenaga kerja pada bagian dengan beban kerja rendah ke bagian lainnya yang membutuhkan lebih banyak tenaga kerja.Unduhan
Referensi
Aguilar-Escobar, V. G., Garrido-Vega, P., Majado-Márquez, J., & Camuñez-Ruiz, J.-A. (2021). Hotel room cleaning: Time study and analysis of influential variables in a Spanish hotel. Journal of Industrial Engineering and Management, 14(3), 645–660. https://doi.org/10.3926/jiem.3441
Duran, C., Cetindere, A., & Aksu, Y. E. (2015). Productivity Improvement by Work and Time Study Technique for Earth Energy-glass Manufacturing Company. Procedia Economics and Finance, 26, 109–113. https://doi.org/10.1016/S2212-5671(15)00887-4
Febriana, N. V., Lestari, E. R., & Anggarini, S. (2015). Analisis Pengukuran Waktu Kerja Dengan Metode Pengukuran Kerja Secara Tidak Langsung Pada Bagian Pengemasan Di PT JAPFA COMFEED INDONESIA TBK. Jurnal Industri, 4(1), 66–73.
Harrianto, R. (2010). Buku Ajar Kesehatan Kerja. EGC.
Herjanto, E. (2008). Manajemen Operasi (Ketiga). Gramedia.
Hilbert, G., Gruson, D., Vargas, F., Valentino, R., Chene, G., Boiron, J.-M., Pigneux, A., Reiffers, J., Gbikpi-Benissan, G., & Cardinaud, J.-P. (2000). Noninvasive continuous positive airway pressure in neutropenic patients with acute respiratory failure requiring intensive care unit admission. Critical Care Medicine, 28(9), 3185–3190. https://doi.org/10.1097/00003246-200009000-00012
Houshyar, E., & Kim, I.-J. (2018). Understanding musculoskeletal disorders among Iranian apple harvesting laborers: Ergonomic and stop watch time studies. International Journal of Industrial Ergonomics, 67, 32–40. https://doi.org/10.1016/j.ergon.2018.04.007
Makapedua, J., & Tannady, H. (2016). Analisis Pengukuran Waktu Kerja Operator Dan Usulan Perbaikan Dengan Work Sampling (Studi Kasus: Mcdonald’S Hayam Wuruk). Teknik Industri Dan Ilmu Komputer, 19(05), 295–304.
Miranda, S., & Tripiawan, W. (2019). Perbandingan Penentuan Waktu Baku Menggunakan Metode Time Study dan Critical Path Method (CPM). Jurnal Sistem Dan Manajemen Industri, 3(1), 19–30. https://doi.org/10.30656/jsmi.v3i1.1418
Permana, W. D., Bayhaqi, I., & Handayani, C. (2022). Perancangan Operation Process Chart Dan Pengukuran Waktu Baku Dengan Metode Stopwatch Time. JuTMI: Jurnal Teknik Mesin Dan Industri, 1(1), 5–13.
Pradana, A. Y., & Pulansari, F. (2021). Analisis Pengukuran Kerja dengan Stopwatch Time Study untuk Meningkatkan Target Produksi di PT. XYZ. JUMINTEN. https://doi.org/10.33005/juminten.v2i1.217
Rafian, M. A., & Muhsin, A. (2017). Analisis Beban Kerja Mekanik pada Departemen Plant dengan Metode Work Sampling (Studi Kasus pada PT XYZ). OPSI, 10(1), 35–42. https://doi.org/10.31315/opsi.v10i1.2165
Rizani, N. C., Safitri, D. M., & Wulandari, P. A. (2017). Perbandingan Pengukuran Waktu Baku dengan Metode Stopwatch Time Study dan Metode Ready Work Factor (RWF) pada Departemen Hand Insert PT. Sharp Indonesia. Jurnal Teknik Industri, 2(2), 127–136.
Sabrini, A., Rambe, J., & Wahyuni, D. (2013). Pengukuran Beban Kerja Karyawan Dengan Menggunakan Metode Swat (Subjective Workload Assessment Technique) Dan Work Sampling Di Pt. Xyz. Jurnal Teknik Industri FT USU, 8(2), 6–13.
Sutalaksan, I., Anggawisastra, R., & Tjakraatmadja, J. (1979). Teknik tata cara kerja. Bandung: ITB Press.
Unduhan
File Tambahan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
