Measurement of Line Balancing in the Production Process Copper Cathode at PT. Smelting Using Ranked Positional Weight (RPW) Method
DOI:
https://doi.org/10.22441/ijiem.v5i3.23322Keywords:
Line, Balancing, Rank positional weight, WorkstationAbstract
Line balancing is required in the production process. Without a balanced production line at work stations, the production process is less effective and efficient. Refinery at PT. Smelting has a type of mass production process, so it is planned to determine the optimal production line so that the loading on each work station will be more evenly distributed and reduce idle time. The method used is the measurement of working time with a stop watch. the data used is the work element and the time needed by the operator to complete the copper cathode production process which is from the anode arriving at the Anode Preparation Machine (APM) until the copper cathode is finished strapping at the Cathode Washing & Stripping Machine (CWSM). There are two results of the analysis,based on the first analysis that by using the line balancing method, the company can achieve a line efficiency of 78.10% and reduce the balance delay by 15.11% which is from 37.01% to 21.90%.Downloads
References
Agustina, M. M. (2020). Pengaruh Penerapan Stasiun Kerja Dan Postur Kerja Ergonomi Terhadap Kepuasan Kerja Pegawai Di Perpustakaan Universitas Brawijaya (Doctoral dissertation, UNIVERSITAS AIRLANGGA).
Aripin, W. T., & Kurniawan, A. (2019). Analisis Keseimbangan Lintasan di PT. Cibuniwangi Gunung Satria. Jurnal Industrial Galuh, 1(02), 48-58. https://doi.org/10.25157/jig.v1i02.2988
Basuki, M., Hermanto, M. Z., Aprilyanti, S., & Junaidi, M. (2019). Perancangan Sistem Keseimbangan Lintasan Produksi dengan Pendekatan Metode Heuristik. Jurnal Teknologi, 11(2), 117-126. https://doi.org/10.24853/jurtek.11.2.117-126
Cahyawati, A. N. (2019). Analisis pengukuran kerja dengan menggunakan metode stopwatch time study. Prosiding SENTRA (Seminar Teknologi dan Rekayasa), 4, 106-112.
Dharmayanti, I., & Marliansyah, H. (2019). Perhitungan Efektifitas Lintasan Produksi Menggunakan Metode Line Balancing. Jurnal Manajemen Industri dan Logistik, 3(1), 43-54. https://doi.org/10.30988/jmil.v3i1.63
Fenny Novianti., Rr. Rochmoeljati (2023). Quality Control of Edamame Products Using Statistical Quality Control (SQC) and Failure Mode Effect Analysis (FMEA) Methods in PT. XYZ. Indonesian Journal of Industrial Engineering & Management, 4(2), 221-230. http://dx.doi.org/10.22441/ijiem.v4i2.20550
Fitriana, R., & Zanah, L. (2020). Pengaruh Pengendalian Internal Persediaan Bahan Baku dan Perencanaan Proses Produksi Terhadap Kelancaran Proses Produksi Pada PT. Daliatex Kusuma. Akurat: Jurnal Ilmiah Akuntansi FE UNIBBA, 11(3), 93-114. http://ejournal.unibba.ac.id/index.php/AKURAT
Hapid, Y., & Supriyadi, S. (2021). Optimalisasi Keseimbangan Lintasan Produksi Daur Ulang Plastik dengan Pendekatan Ranked Positional Weight. Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 63-70. https://doi.org/10.30656/intech.v7i1.3305
Kusuma, T. Y. T., & Firdaus, M. F. S. (2019). Penentuan Jumlah Tenaga Kerja Optimal untuk Peningkatan Produktifitas Kerja (Studi Kasus: UD. Rekayasa Wangdi W). Integrated Lab Journal, 7(2), 26-36. https://core.ac.uk/download/pdf/270289797.pdf
Matiro, M. A. D., Mau, R. S., Rasyid, A., & Rauf, F. A. (2021). Pengukuran Beban Kerja Menggunakan Metode Full Time Equivalent (FTE) Pada Divisi Proses PT. Delta Subur Permai. Jambura Industrial Review (JIREV), 1(1), 30-39. https://doi.org/10.37905/jirev.v1i1.7774
Meyers, F. E., & Stewart, J. R. (2002). Motion and time study for lean manufacturing. Upper Saddle River, N.J: Prentice Hall.
Mustofa, A. Z., & Priyasmanu, T. (2021). Perancangan Ulang Alat Pengaduk Sabun Cair pada Pengatur Kecepatan. Jurnal Valtech, 4(2), 261-269. https://eprints.itn.ac.id/4101/15/JURNAL%20HARYONO%20-%202019.pdf
Rahayu, M., & Juhara, S. (2020). Pengukuran Waktu Baku Perakitan Pena Dengan Menggunakan Waktu Jam Henti Saat Praktikum Analisa Perancangan Kerja. Jurnal Pendidikan dan Aplikasi Industri (UNISTEK), 7(2), 93-97. https://doi.org/10.33592/unistek.v7i2.650
Rahma, C., Ariska, A., & Afriasari, V. (2019). Optimalisasi Pelayanan Unit BPJS RSUD Melalui Perhitungan Waktu Siklus Operator Pelayanan SEP. Jurnal Optimalisasi, 4(1), 11-20. https://doi.org/10.35308/jopt.v4i1.1278
Sumasto, F., Nugroho, Y. A., Purwojatmiko, B. H., Wirandi, M., Imansuri, F., & Aisyah, S. (2023). Implementation of Measurement System Analysis to Reduce Measurement Process Failures on Part Reinf BK6. Indonesian Journal of Industrial Engineering & Management.
Trenggonowati, Dyah. 2019. Mengukur Efisiensi Lintasan dan Stasiun Kerja Menggunakan Metode Line Balancing Studi Kasus PT XYZ. Jurnal Industrial Services, 4(2), 97-105. http://dx.doi.org/10.36055/jiss.v4i2.5158
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
