Analysis of Work Accident Risk in Production Section Using Hazard Analysis and Operability Study (HAZOP) and Analytical Hierarchy Process (AHP) (Case Study: PT XYZ)
DOI:
https://doi.org/10.22441/ijiem.v6i2.30043Keywords:
Potential risk, Occupational health and safety, HAZOP, AHPAbstract
PT XYZ is a company that produces plywood. During the production process activities, there are potential risks that arise and can affect the safety and health of field workers. Therefore, this study aims to determine the risk analysis that occurs during the production process activities, determine the risk level and look for alternative improvement proposals on risks that have extreme levels. The method used to analyze the risk level in the production process is the HAZOP (Hazard Analysis And Operability Study) method and to determine the best improvement proposal using the AHP (Analytical Hierarchy Process) method. Based on the results of the analysis using the HAZOP method, there is a risk analysis of 35 risks with a total of 14 machine activities of which 57% for low risk with a total of 20 risks, 17% for moderate risk with a total of 6 risks, 17% for high risk with a total of 6 risks and 9% for extreme risk with a total of 3 risks. The proposed improvements were selected based on the weighting results using the AHP method. In the AHP method, criteria in the form of priority risks are used, namely the risk on the rotary machine (workers' feet are injured when changing the rotary knife) with the highest weight of 0.665 with the selected alternative, namely the socialization of K3-related training and SOPs in changing knives in rotary machines with a weight of 0.512.Downloads
References
Cantika, N.A., Fathimahhayati, L. D., & Pawitra, T. A. (2022). K3 Risk Assessment in Fuel Flow to Storage Tanks Using HAZOP and FTA Methods. INTECH Journal of Industrial Engineering, Serang Raya University, 8(1), 67–74. https://doi.org/10.30656/intech.v8i1.4640
Casban, C. (2018). Analysis of the Causes of Work Accidents in the Washing Corner Process in the Cleaning Division using the Fishbone Diagram and SCAT Methods. Jurnal Integrasi Sistem Industri, 5(2), 111-121.
https://doi.org/10.24853/jisi.5.2.111-121
Jumanto, J., & Nasution, A. P. (2017). Pengaruh Keselamatan dan Kesehatan Kerja (K3), Kedisiplinan dan Pengawasan Kerja Terhadap Produktivitas Karyawan Bagian Seksi Cutting Crimping di PT. Sumitomo Wiring Systems Batam Indonesia. Jurnal Bening, 4(2), 1–21. https://doi.org/10.33373/bening.v4i2.726
Line, M., Di, B., Harjohn, P. T., Mondina, R. R., Roslinda, E., & Hardiansyah, G. (2019). Efisiensi Tenaga Kerja Produksi Kayu Lapis Menggunakan Metode Line Balancing di PT. Harjohn Timber LTD. Jurnal Hutan Lestari, 7(2), 773–785. https://doi.org/10.26418/jhl.v7i2.34071
Misra, I., Hakim, S., & Pramana, A. (2020). Risk Management of Islamic Economic Business Approach. K-Media Publisher, Yogyakarta.
Ningsih, S. O. D., & Hati, S. W. (2019). Analisis Resiko Keselamatan Dan Kesehatan Kerja (K3) dengan Menggunakan Metodehazard And Operability Study (HAZOP) pada Bagian Hydrotest Manualdi PT. Cladtek BI Metal Manufacturing. Journal of Business Administration, 3(1), 29-39. e-ISSN:2548-9909
Nugroho, S. (2021). Analysis and Accident Control Efforts in the Can Production Section of PT XY Sidoarjo Using the HAZOP Approach. Doctoral dissertation: Universitas 17 Agustus 1945).
Ponda, H., & Fatma, N. F. (2019). Hazard Identification, Assessment and Control of Occupational Safety and Health (K3) Risks in the Foundry Department of PT. SICAMINDO. Journal of Heuristic Industrial Engineering, 16(2), 62–74. https://doi.org/10.30996/he.v16i2.2968
Putri, S. R., & Widjajati, E. P. (2021). Occupational Safety Risk Analysis in the Cutting Machine Maintenance Department of PT XYZ Using the Hazard and Operability Study (HAZOP) Method. Journal of Industrial Management and Technology (Juminten), 2(2), 156–167. https://doi.org/10.33005/juminten.v2i2.246
Ramadhani, N., & Rini, W. N . (2021). Study of Hazard Identification, Risk Analysis and Hazard Control at PT X in 2021. Journal of Public Health, 8(2), 168–179. ISSN 2442-4986. https://doi.org/10.31602/ann.v8i2.5105
Sasongko, A., Astuti, IF, & Maharani, S. (2017). New Employee Selection Using AHP (Analytic Hierarchy Process) Method. Informatics Mulawarman: Scientific Journal of Computer Science, 12(2), 88. https://doi.org/10.30872/jim.v12i2.650
Satriani, N. N., Cholissodin, I., & Fauzi, M. A. (2018). Decision Support System for Determining BBP-PPA Scholarship Recipients Using the AHP-PROMETHEE I Method Case Study: FILKOM Universitas Brawijaya Sentiment Analysis View project Deep Intelligence Smart Government View project. Journal of Information Technology and Computer Science Development, 2(7), 2780-2788. http://j-ptiik.ub.ac.id
Setiawan, E., Tambunan, W., Kartika, D., Kuncoro, R. (2019). Analisis Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard Analysis. JIME (Journal of Industrial and Manufacture Engineering), 3(2), 95 - 103. https://doi.org/10.31289/jime.v3i2.2959
Supriadi, A., Trisatya, D. R., & Sulastiningsih, I. M. (2020). Properties of Plywood Made from Five Types of Wood from Riau. Indonesian Journal of Agricultural Sciences, 25(4), 657–663. https://doi.org/10.18343/jipi.25.4.657
Tyas, A. A. W. P (2011). Pentingnya Keselamatan dan Kesehatan Kerja dalam Meningkatkan Produktivitas Kerja Karyawan. Forum Ilmiah, 8(3), 217-223. https://ejurnal.esaunggul.ac.id/index.php/Formil/article/view/778
Yuliandi, C. D., & Ahman, E. (2019). Application of Work Safety and Health (K3) in the Work Environment of Artificial Insemination Center (BIB) Lembang Application of Work Safety and Health (K3) in the Work Environment of Artificial Insemination (Bib) Lembang. Managerial: Journal of Management and Information Systems, 18(2), 98–109. http://ejournal.upi.edu/index.php/manajerial/
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
