Implementation of Measurement System Analysis to Reduce Measurement Process Failures on Part Reinf BK6

Fredy Sumasto; Yesaya Abdi Nugroho; B. Handoko Purwojatmiko; Mohammad Wirandi; Febriza Imansuri; Siti Aisyah

doi:10.22441/ijiem.v4i2.20212

Implementation of Measurement System Analysis to Reduce Measurement Process Failures on Part Reinf BK6

Authors

Fredy Sumasto Politeknik STMI Jakarta http://orcid.org/0000-0001-9429-6241
Yesaya Abdi Nugroho Politeknik STMI Jakarta
B. Handoko Purwojatmiko Politeknik STMI Jakarta http://orcid.org/0000-0002-6279-1579
Mohammad Wirandi Politeknik Industri Petrokimia Banten http://orcid.org/0000-0003-3348-1624
Febriza Imansuri Politeknik STMI Jakarta
Siti Aisyah Politeknik STMI Jakarta

DOI:

https://doi.org/10.22441/ijiem.v4i2.20212

Keywords:

ANOVA, Automotive Part, MSA, Quality

Abstract

This study aims to reduce the failure of the measurement process on Part Reinf BK6 in the automotive industry which prioritizes accuracy and precision in the process to maintain product quality and customer satisfaction. This study used the measurement system analysis (MSA) method to analyze the Gage R&R on a measurement system, with 2 operators and 10 parts measured with 3 repetitions. The MSA results before improvement showed a Total Gage R&R of 67.80% with a repeatability value of 0.98% and a reproducibility value of 66.82%. The result indicated that the measurement system needs to be improved because the Gage R&R is still above 30%. After improving the measurement process by adding the Go No Go pin as an additional tool, the MSA results show the Total Gage R&R value after the improvement is made to 10.11% with repeatability and reproducibility values of 10.11% and 0% respectively. Based on the results of the study, it can be concluded that the improvements made have a significant effect on the measurement system on Part Reinf BK6. This will improve accuracy and precision in the measurement process, maintain product quality, and increase customer satisfaction. Therefore, improving the measurement system is very important in the automotive industry.

Downloads

Download data is not yet available.

References

Al-Refaie, A., & Bata, N. (2010). Evaluating measurement and process capabilities by GR&R with four quality measures. Measurement: Journal of the International Measurement Confederation, 43(6), 842–851. https://doi.org/10.1016/j.measurement.2010.02.016

Aslam, M., & Bantan, R. A. R. (2020). A study on measurement system analysis in the presence of indeterminacy. Measurement: Journal of the International Measurement Confederation, 166, 108201. https://doi.org/10.1016/j.measurement.2020.108201

Budiantono, S., Mumpuni Retnaningsih, S., & Fitra Aksioma Jurusan Statistika, D. (2016). Measurement System Analysis Repeatability dan Reproducibility (Gauge R&R) pada Alat Vickers Hardness Tester Di PT Jaykay Files Indonesia. Jurnal Sains Dan Seni Its, 5(2), 2337–3520.

Cepova, L., Kovacikova, A., Cep, R., Klaput, P., & Mizera, O. (2018). Measurement System Analyses - Gauge Repeatability and Reproducibility Methods. Measurement Science Review, 18(1), 20–27. https://doi.org/10.1515/msr-2018-0004

Chenoy, D., Ghosh, S. M., & Shukla, S. K. (2019). Skill development for accelerating the manufacturing sector: the role of ‘new-age’ skills for ‘Make in India.’ International Journal of Training Research, 17(sup1), 112–130. https://doi.org/10.1080/14480220.2019.1639294

Down, M., Czubak, F., Gruska, G., Stahley, S., & Benham, D. (2010). Measurement System Analysis (4th ed.). General Motors Corporation.

Ferreira, I. S. B., Peruchi, R. S., Fernandes, N. J., & Rotella Junior, P. (2021). Measurement system analysis in angle of repose of fertilizers with distinct granulometries. Measurement: Journal of the International Measurement Confederation, 170(May 2020), 108681. https://doi.org/10.1016/j.measurement.2020.108681

Fu, Q. (2022). How does digital technology affect manufacturing upgrading? Theory and evidence from China. PLoS ONE, 17(5 May), 1–18. https://doi.org/10.1371/journal.pone.0267299

Huda, H., & Islahudin, N. (2021). Measurment System Analysis Pada Operator Pengecekan Visual Menggunakan Metode Attribute Agreement System Di Industri Manufaktur. JISI: Jurnal Integrasi Sistem Industri, 8(2), 35. https://doi.org/10.24853/jisi.8.2.35-40

Jaiganesh, V., Surya, G. S., Shanker, B., Kumarr, J. S., & Sownder, S. (2011). Applying gauge repeatability and reproducibility analysis for a cast dimesion in a foundry-a case study. Indian Foundry J., 57(3), 37 – 43. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85041461150&partnerID=40&md5=0f07cb8d5dc67afa894d4b623612bbc3

Ming, P. (2016). Research on the Core Technology and the Development Tendency of Modern Precision Machinery Manufacturing. 4th International Conference on Mechanical Materials and Manufacturing Engineering (MMME 2016), Mmme. https://doi.org/10.2991/mmme-16.2016.157

Mohamed, N., & Davahran, Y. (2006). Measurement System Analysis Using Repeatability and Reproducibility Techniques. Statistika, 6(1), 37–41.

Pinthapataya, J. (2022). Guidelines To Improve Manpower Potential In The Manufacturing Industry In The Area Of The Eastern Economic Corridor : A Case Study Of The Rail Industry. Journal of Positive School Psychology, 6(11), 61–74.

Saikaew, C. (2018). An implementation of measurement system analysis for assessment of machine and part variations in turning operation. Measurement: Journal of the International Measurement Confederation, 118, 246–252. https://doi.org/10.1016/j.measurement.2018.01.008

Setiawan, Y., & Rahardjo, D. J. (2013). Implementasi Iso / Ts 16949 : 2009. Jurnal Titra, 1(1), 21–26.

Setyabudhi, A. L., Veza, O., Meldra, D., Abdurahman, N. C., & Reza Saputra, M. R. (2021). Penerapan Metode Measurement System Analysis Gage R&R Pada Pengukuran Produk Base Plate Magazine. Jurnal Rekayasa Sistem Industri, 6(2), 86–89. https://doi.org/10.33884/jrsi.v6i2.3642

Shao, C., Wang, H., Suriano-Puchala, S., & Hu, S. J. (2019). Engineering fusion spatial modeling to enable areal measurement system analysis for optical surface metrology. Measurement: Journal of the International Measurement Confederation, 136, 163–172. https://doi.org/10.1016/j.measurement.2018.12.061

Sumasto, F., Satria, P., & Rusmiati, E. (2022). Implementasi Pendekatan DMAIC untuk Quality Improvement pada Industri Manufaktur Kereta Api. Jurnal INTECH Teknik Industri Universitas Serang Raya, 8(2), 161–170. https://doi.org/doi.org/10.30656/intech.v8i2.4734

Wijanarko, H., Saputra, A. W., Suciningtyas, I. K. L. N., & Fatekha, R. A. (2022). An Implementation of Measurement System Analysis for IoT-Based Waste Management Development. Jurnal Rekayasa Elektrika, 18(4). https://doi.org/10.17529/jre.v18i4.26910

Downloads

Published

2023-06-30

How to Cite

Sumasto F, Nugroho YA, Purwojatmiko BH, Wirandi M, Imansuri F, Aisyah S. Implementation of Measurement System Analysis to Reduce Measurement Process Failures on Part Reinf BK6. IJIEM [Internet]. 2023 Jun. 30 [cited 2026 May 28];4(2):212-20. Available from: https://training-ojs3-publikasi.mercubuana.ac.id/index.php/ijiem/article/view/20212

Download Citation

Issue

Vol. 4 No. 2: June 2023

Section

Articles

License

The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.

We declare that:

1. This paper has not been published in the same form elsewhere.

2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.

3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.

Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.

The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.

Retained Rights/Terms and Conditions

1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.

2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.

3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.