Analysis of Employee Work Posture with the Quick Exposure Check (QEC) and Rapid Entire Body Assessment (REBA) Method (Case Study: CV. Wijaya Mandiri Label)
DOI:
https://doi.org/10.22441/ijiem.v4i3.21369Keywords:
Anthropometry data, Ergonomics, QEC, REBA, Work postureAbstract
CV Wijaya Mandiri Label is a company engaged in offset printing label printing. The products produced from the company can vary according to customer demand. The printing industry generally still uses work activities in the form of manual material handling which includes lifting, pushing, and pulling to move an object. This research aims to identify the level of potential risk of injury to employee work postures. In this study, the methods uses were Quick Exposure Check (QEC) and Rapid Entire Body Assessment (REBA). The QEC method is used as an initial identification of potential ergonomic problems and the risk of injury at workstations where the exposure level is 83% (very high risk) and 82.7% (very high risk). So that further research is needed by assessing work postures using the REBA method with REBA score 11 (very high) and REBA score 9 (high). The proposed improvements are in the form of manual scissor lift table and an adjustable work desk following the anthropometry of workers. From these tools can reduce the risk level REBA score from 11 to 7 (medium) and REBA score from 9 to 5 (medium) which is known from the simulation results of using tools using 3D software.Downloads
References
Anthony, M. B. (2020). Analisis Postur Pekerja Pengelasan Di CV . XYZ dengan Metode Rapid Entire Body Assessment ( REBA ). JATI UNIK, 3(2), 110–119.
Anwardi; Harpito; M. Rasyid Ridha. (2018). Perancangan Alat Bantu untuk Memperbaiki Postur Kerja Karyawan pada Usaha Air Minum Mesjid Nurul Islam dengan Metode Quick Exposure Checklist ( QEC ). ( Studi Kasus : Usaha Air Minum Mesjid Nurul Islam ). Jurnal Teknik Industri, 4(2), 118–125. http://dx.doi.org/10.24014/jti.v4i2.6514
Aras, A. F., Rahmatika, D., & Putra, E. (2019). Perancangan meja laptop portable yang ergonomis untuk penyandang cerebral palsy dengan pendekatan antropometri. Jurnal Inovator, 2(1), 16–19. www.ojs.politeknikjambi.ac.id/index/inovator
Atmojo, E. B. T. (2020). Analisis Nordic Body Map Terhadap Proses Pekerjaan Penjemuran Kopi Oleh Petani Kopi. Jurnal Valtech, 3(1), 30–33.
Bastuti, S., & Zulziar, M. (2020). Analisis Postur Kerja Dengan Metode Owas (Ovako Working Posture Analysis System) Dan Qec (Quick Exposure Checklist) Untuk Mengurangi Terjadinya Kelelahan Musculoskeletal Disorders Di Pt. Truva Pasifik. JITMI (Jurnal Ilmiah Teknik Dan Manajemen Industri), 2(2), 116. https://doi.org/10.32493/jitmi.v2i2.y2019.p116-125
Dewanti, G. K., Surya, P., & Tiara. (2020). Analisis postur kerja pada karyawan bengkel warlok barbeku multi servis dengan menggunakan REBA. Jurnal IKRA-ITH Teknologi, 4(3), 57–64.
Fragastia, V. A., & Ramadhan, M. D. (2022). Penilaian Postur Kerja Operator Pada UKM XYZ Dengan Metode Biomekanika. IESM Journal (Industrial Engineering System and Management Journal), 3(1), 67–80. https://www.doi.org/10.22303/iesm.3.1.2022.67-80
Hunusalela, Z. F., Perdana, S., & Dewanti, G. K. (2021). Analisis Postur Kerja Operator Dengan Metode RULA dan REBA Di Juragan Konveksi Jakarta. IKRAITH-Teknologi, 6(1), 1–10. https://doi.org/10.37817/ikraith-teknologi.v6i1.1656
Purbasari, A. (2019). Analisis Postur Kerja Secara Ergonomi Pada Operator Pencetakan Pilar Yang Menimbulkan Risiko Musculoskeletal. Sigma Teknika, 2(2), 143. https://doi.org/10.33373/sigma.v2i2.2064
Rahmawati, A., & Utami, D. L. (2020). Analisa Postur Pengendara Motor Untuk Evaluasi Dimensi Bagian Tempat Duduk Menggunakan Metode Reba. Jurnal Untuk Masyarakat Sehat (JUKMAS), 4(1), 31–40. https://doi.org/10.52643/jukmas.v4i1.790
Ramdhani, R., & Noor, R. A. M. (2018). Analisis Ergonomi Menggunakan Metode Quick Exposure Checklist Pada Praktikan Bidang Keahlian Chassis Otomotif. Journal of Mechanical Engineering Education, 5(1), 84. https://doi.org/10.17509/jmee.v5i1.12624
Yuslistyari, E. I., & Adhadin, A. (2018). Perbaikan Postur Kerja Operator Pengelasan dengan Metode Quick Exposure Check (QEC). Jurnal INTECH Teknik Industri Universitas Serang Raya, 4(1), 17. https://doi.org/10.30656/intech.v4i1.853
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
