Defect Analysis of Packaging Bottle Products Using Six Sigma and Kaizen Methods at PT. XYZ
DOI:
https://doi.org/10.22441/ijiem.v5i1.22420Keywords:
Defect, Bottle, Six Sigma, KaizenAbstract
PT XYZ is a company engaged in manufacturing plastic packaging. The company produces various forms of packaging, one of which is cosmetic bottle packaging. Meanwhile, based on the problems of the production process, various types of product defects such as black spots, leaks, and oil dirt are often found. The company produces the most defective products in 30ml cosmetic bottle products, with a percentage of 3% to 4% of the total production. Based on the above problems, this study aims to determine the level of defects and the sigma value of product quality. In addition, provide suggestions for improvement to reduce the level of product defects at PT XYZ. The methods used are Six sigma and Kaizen. The Six Sigma stages include define, measure, analyze, and improve. The improve stage is assisted by the Kaizen Five M Checklist and Kaizen Five Step Plan. The improve stage is assisted by the Kaizen Five M Checklist and Kaizen Five Step Plan. Based on the results of research with the six sigma method, the percentage of black spot defects is 74%, leaking is 14.1%, and dirty oil is 11.9%. the proposed improvements given are providing 5S training and SOP refreshment, sorting reject products before grinding, cleaning the machine and production area at the end of each shift, replacing blowpin threads and bolts, and others.Downloads
References
Bukhori, N. D., & Assidiqi, A. F. (2020). Pedoman Manajemen Industri di PT. SEM INDONESIA: Smart Earmuff (1st ed.). AFA GROUP.
Effendi, U. (2021). Implikasi Iklan Brosur, Kualitas Produk, dan Citra Merek. Yayasan Barcode.
Fathurohman, D. M., Dewi, I. N., & Firman. (2023). Quality Improvement to Reduce Paper Bags Defects Using DMAIC Method in Cement Industry. IJIEM (Indonesian Journal of Industrial Engineering & Management), IV(3), 624-631. doi:10.22441/ijiem.v4i3.22041
Hairiyah, N., Amalia, R. R., & Nugroho, I. K. (2020). Penerapan Six Sigma dan Kaizen Untuk Memperbaiki Kualitas Roti di UD. CJ Bakery Jurnal Teknologi & Industri Hasil Pertanian, 25(1), 35. https://doi.org/10.23960/jtihp.v25i1.35-43
Hasan, M., Permatasari, R., Alamsyahbana, M., Hamid, D., Supriadi, B., Sitohang, A., Dai, S., Januardin, & Alfiana. (2023). Manajemen UMKM Berkelanjutan. Media Sains Indonesia.
Herlambang, H. (2020). Six Sigma Implementation in Connector and Terminals Manufacturing Company : A Case Study. IJIEM - Indonesian Journal of Industrial Engineering and Management, 1(1), 1. https://doi.org/10.22441/ijiem.v1i1.9305
Indrawansyah, I., & Cahyana, B. J. (2019). Analisa Kualitas Proses Produksi Cacat Uji Bocor Wafer dengan menggunakan Metode Six Sigma serta Kaizen sebagai Upaya. Prosiding Seminar Nasional Sains Dan Teknologi, 1–8.
Rochmah, S. (2022). Buku Ajar Manajemen Operasi 1 (M. Nasrudin (ed.); 1st ed., pp. 52–53). Penerbit NEM.
Rofieq, M., & Septiari, R. (2021). Penerapan Seven Tools dalam Pengendalian Kualitas Botol Plastik Kemasan 60 ML. Journal of Industrial View, 03, 23–34. : https://doi.org/10.26905/jiv.v3i1.5720
Rohkma, A. N., & Aryanny, E. (2023). Analisa Tingkat Kecacatan Bata Beton Ringan Dengan Metode Seven Tools dan FMEA di CV. XYZ - Mojokerto. Jurnal Kendali Teknik Dan Sains, 1(3). https://doi.org/https://doi.org/10.59581/jkts-widyakarya.v1i3.
Rumampuk, N. I., & Yuliawati, E. (2019). Analisa Pengendalian Kualitas Produk Kastok Plastik Menggunakan Metode Six Sigma Dan Pendekatan Kaizen. Seminar Nasional Sains Dan Teknologi Terapan VII, 143–150.
Syahputra, M. J., & Aisyah, S. (2022). Kaizen Method Implementation in Industries: Literature Review and Research Issues. IJIEM (Indonesian Journal of Industrial Engineering & Management), III(2), 116-130. doi:https://dx.doi.org/10.22441/ijiem.v3i2
Soemahadiwidjojo, A. T. (2017). Six Sigma Metode Pengukuran Kinerjs Perusahaan Berbasis Statistik (1st ed.). RAIH ASA SUKSES.
Supardi, & Dharmanto, A. (2020). Analisis Statistical Quality Control pada Pengendalian Kualitas Produk Kuliner. JIMFE (Jurnal Ilmiah Manajemen Fakultas Ekonomi), 6(2), 199–210. https://doi.org/https://doi.org/10.34203/jimfe.v6i2.2622
Utomo, U. (2020). A Systematic Literature Review of Six Sigma Implementation in Services Industries. IJIEM - Indonesian Journal of Industrial Engineering and Management, 1(1), 45. https://doi.org/10.22441/ijiem.v1i1.8846
Wirawati, S. M. (2019). Analisis Pengendalian Kualitas Kemasan Botol Plastik dengan Metode Statistical Process Control (SPC) di PT. Sinar Sosro KPB Pandeglang. Jurnal InTent, 2(1), 94–102. https://ejournal.lppm-unbaja.ac.id/index.php/intent/article/view/524. https://doi.org/10.47080/intent.v2i1.524
Yuswandi, D., Anindya, D., & Dwicahyani, R. (2021). Pengendalian Kualitas Produk Cacat Hollow Alumunium Menggunakan Metode Six Sigma dengan Tahapan DMAIC (Studi Kasus di PT. XYZ Surabaya). Prosiding SENASTITAN: Seminar Nasional Teknologi Industri Berkelanjutan, 1(1), 421.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
