The Proposed Quality Improvement of Incense Products Using the Six Sigma Method at UD. Dupa Karya Mandiri
DOI:
https://doi.org/10.22441/ijiem.v5i3.24274Keywords:
Defect products, Quality, Incense, Six sigmaAbstract
In 2023, Indonesia's Hindu population accounted for approximately 1.7% of the total population, equating to roughly four million individuals within a populace of 250 million. UD. Dupa Karya Mandiri being a prominent producer of incense products in high demand. However, during the 2023 Chinese New Year (Imlek) and Nyepi celebrations, expected to spur increased demand, the market witnessed a downturn due to a surge in defective product rejection. This study aims to describe the factors that cause product defects, measure the level of sigma level in incense production, then proceed with efforts to improve product quality. Six Sigma methodology is used to handle this problem, this study employs the Six Sigma methodology. The analysis yielded a sigma value of 2.1 and a DPMO (Defects Per Million Opportunities) value of 289,228.10, signifying the necessity of further enhancement in quality to reduce the number of defective products and elevate the sigma value. Therefore, this research gives recommendations for improvement to UD. Dupa Karya Mandiri includes SOPs for Drying, Understanding the Production Process, Machine Maintenance, Bamboo Encek Replacement and Monthly Production Reports.Downloads
References
Andriansyah, A. R., & Sulistyowati, W. (2021). Clarisa Product Quality Control Using Methods Lean Six Sigma and FMECA Method (Failure Mode and Effect Cricitality Analysis) (Case Study: Pt. Maspion Iii). Prozima (Productivity, Optimization and Manufacturing System Engineering), 4(1), 47–56. https://doi.org/10.21070/prozima.v4i1.1272
Council F Certification, C. J. S. (2018). Six Sigma: A Complete Step-By-Step Guide (July 2018 Edition). Harmony Living.
Eka Sura Adnyana, P., Nyoman Suryani, N., Peradah Indonesia Bali, D., & Gianyar, K. (2021). Agama Hindu Di Indonesia: Perumusan Konsep Keberagamaan Hindu Dalam Kehidupan Berbangsa dan Bernegara, Volume 12 Jilid 2.
Fitria, S. M., & Novita, N. (2020). Six Sigma Sebagai Strategi Bisnis Dalam Upaya Peningkatan Kualitas Produk. Jati: Jurnal Akuntansi Terapan Indonesia, 3(1). https://doi.org/10.18196/jati.030121
Hafizh, M. A., Prabowo, R., & Artikel, S. (2023). Implementasi Lean Six Sigma Untuk Meminimasi Waste Proses Produksi Obat Nyamuk Bakar Informasi Artikel Abstrak. Jurnal Intech Teknik Industri Universitas Serang Raya, 9, 1–12. https://doi.org/10.30656/intech.v9i1.4583
Musa, N. A., & Suseno, D. (2022). Analisis Pengendalian Kualitas Produksi Ikan Dengan Metode Six Sigma Untuk Mengurangi Jumlah Cacat Produk. Jurnal Ilmiah Teknik Mesin, Elektro Dan Komputer, 2(1).
Sanusi, S., Lubis, A. L., & Suhaeri, A. (2020). Pengendalian Kualitas Produk Stopper dan Gasket dengan Menggunakan Metode Six Sigma Pada PT. XYZ. Jurnal Industri Kreatif, 4(Agustus), 2597–8950. https://doi.org/10.36352/jik.v4i02.196
Manan, A., Handika, S., & Nalhadi, A. (2018). Usulan Pengendalian Kualitas Produksi Benang Carded dengan Metode Six Sigma. Jurnal Intech Teknik Industri Universitas Serang Raya, 4(1), 38-44. https://doi.org/10.30656/intech.v4i1.856
Nasution, A., Putri, D., & Inayah, M. (2021). Talenta Conference Series: Energy and Engineering Pengendalian Kualitas Pada Produk Lilin Spiral Dengan Pendekatan Six Sigma PT. ABC. Talenta Conference Series: Energy and Engineering. https://doi.org/10.32734/ee.v4i1.1268
Pambudi, E. S. (2019). Pengendalian Kualitas Busa Sch 6 Menggunakan Pendekatan Metode Six Sigma di PT. MJ. Prosiding Semnas, 1, 79–85.
Pratiwi, E., Moektiwibowo, H., & Indramawan, D. (2020). Pengendalian Kualitas Proses Produksi Obat Tablet dengan Menggunakan Metode Six Sigma di PT MDF. Jurnal Teknik Industri, 7(2), 96-106. https://doi.org/10.35968/jtin.v7i2.809
Silalahi, E., Emaputra, A., & Parwati, C. I. (2022). Analisis Pengedalian Kualitas Produk Sabun Cuci Piring Menggunakan Metode Six Sigma Dan Kaizen di CV Master Multi Jaya. Prosiding Seminar Nasional Aplikasi Sains & Teknologi (SNAST) 2022.
Sinambela, Y., Sinaga, R., & Simbolon, T. (2023). Pengendalian Kualitas Hasil Produksi Cetak Buku Dengan Menggunakan Metode Six Sigma. Journal of Industrial and Manufacture Engineering, 7(1), 99–108. https://doi.org/10.31289/jime.v7i1.9449
Sitompul, A. A., Zaharuddin, Z., & Fazri, M. (2023). Pengendalian Kualitas Curd Palm Oil Menggunakan Integrasi Metode Six Sigma-Fmea Di Pt Grahadura Leidong Prima. Blend Sains Jurnal Teknik, 1(4), 343–355. https://doi.org/10.56211/blendsains.v1i4.244
Suharto, T. (2023, April 24). Jelang Imlek, Dupalo Alami Kenaikan Permintaan Dupa. Republika.Co.Id.
Tambunan, D. G., Sumartono, B., & Moektiwibowo, D. H. (2018). Analisis Pengendalian Kualitas dengan Metode Six Sigma dalam Upaya Mengurangi Kecacatan pada Proses Produksi Koper di PT SRG. Jurnal Teknik Industri, 9(1), 58-77. https://doi.org/10.35968/jtin.v9i1.487
Tarigan, U., & Luhur, S. (2021). Pengendalian Kualitas Dengan Pendekatan Six Sigma Pada Produksi Dupa Biting Kecil Pada Pt XYZ. Talenta Conference Series: Energy and Engineering. https://doi.org/10.32734/ee.v4i1.1275
Trisna Dewi, K., Ayu Diah Larashanti, I., Dwi Sentana Putra, K., & Komang Trisna Dewi, K. (2023). Perbandingan Istilah Otonan yang Terdapat dalam Agama Hindu Terhadap Agama-Agama Lain di Indonesia. Jurnal Pendidikan Hindu. http://ojs.uhnsugriwa.ac.id/index.php/gw
Wulandari, W., & Sodik, S. (2018). Peningkatan Kualitas Produk Dupa Bagi Mitra Ibm Dupa di Desa Dalisoso Kabupaten Malang. Jurnal Akses Pengabdian Indonesia, 3(1), 48-53. http://ejournal.umm.ac.id/index.php/dedikasi/article/view/6443
Wicaksono, A., & Yuamita, F. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode and Effect Analysis (FMEA) untuk Meminimumkan Cacat Kaleng di PT. Maya Food Industries. Jurnal Teknologi dan Manajemen Industri Terapan/ JTMIT, 1(1), 1-6. https://doi.org/10.55826/tmit.v1iI.6
Wicaksono, H. (2021). Pengendalian Kualitas Menggunakan Metode Six Sigma dan Fmea Untuk Mereduksi Cacat pada Produk Gamis di Ratu Balad Collection: Tugas Akhir.
Windiarti, E. P. (2022). Analisis Pengendalian
Kualitas Produk Garment Dengan Metode Six Sigma Dan Failure Mode and Effect Analysis (Fmea) di Bagian Sewing Produksi (Studi Kasus: PT XYZ). https://eprints.ums.ac.id/113602/3/Erika%20Putri%20W_Naspub.pdf
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
