Optimization of Transportation Distribution Costs Using Improved Vogel's Approximation Method (IVAM) (Case Study: PT. Sinar Putra Pertam)
DOI:
https://doi.org/10.22441/ijiem.v5i2.27288Keywords:
Distribution, Transport method, Improved Vogel's approximation method (IVAM), OptimizationAbstract
Distribution is the process of distributing goods from source to destination. The main problem with distribution is the inefficiencies in distribution costs. The distribution problem can be solved by transportation methods. The transportation method is carried out in two stages, namely finding the initial solution then looking for the optimal solution. This study uses Improved Vogel's Approximation Method (IVAM) initial solution method and Modified Distribution Method (MODI) as the optimal solution method in distributing 3 Kg LPG gas PT. Sinar Putra Pertam. This study aims to find out how IVAM and MODI work in getting optimal solutions, and compare the results of these calculations with the calculation of 3 Kg LPG gas distribution costs from the company. In this study, there were 2 sources of LPG gas filling which were distributed using a fleet of colt trucks to 15 destinations. The distribution cost is calculated based on fleet fuel consumption. The results of the initial solution calculation show IVAM requires three iterations to get a solution. While the calculation results of the MODI optimization test require one iteration to achieve the optimal solution. The distribution cost using IVAM and MODI is the same amounting to IDR 6,816,230.00 so that it is smaller than the conventional calculation results from the company, which is IDR 9,307,000.00. Based on these results, the transportation method used in this study can save 26.76% of the total distribution cost.
Downloads
References
Amaliah, B. (2016). Metode Max Min Vogel’s Approximation Method untuk Menemukan Biaya Minimal pada Permasalahan Transportasi. Prosiding Seminar Nasional Manajemen Teknologi XXIV. https://www.researchgate.net/publication/291831603
Febrianto, P., Arrazi, H., & Merlyn, K. (2023). Analisis Penentuan Rute Distribusi Gas Elpiji 3 Kg pada PT. Surya Gas Mandiri Manado. Jurnal EMBA, 11(1), 549–557. https://doi.org/10.35794/emba.v11i1.45868
Feriza, Y., & Murni, D. (2020). Optimasi Biaya Distribusi Pengiriman Beras Sejahtera pada Perum Bulog Divisi Regional Sumatera Barat dengan Kombinasi North West Corner Method (NWCM) dan Stepping Stone Method (SSM). UNPjoMath, 3(1), 95–100. http://dx.doi.org/10.24036/unpjomath.v5i1.8920
Ganesan, K., & Dheebia, D. (2020). A Study of Intuitionistic Fuzzy Transportation Problem Using Vogel"s Approximation Method. International Journal of Mathematics Trends and Technology, 66(6). https://doi.org/10.14445/22315373/IJMTT-V66I6P522
Gofur, M., Sarjono, Saputra, M. P., Apriani, A. Y. (2023). Optimization of Basket Oven Oil Seal Design For Quality, Productivity and Material Handling. IJIEM (Indonesian Journal of Industrial Engineering & Management), 4(3), 618-623. https://doi.org/10.22441/ijiem.v4i3.20303
Hermanto, K., Adiasa, I., Altarisi, S., Rabani, R., & Amirul, M. (2020). Rute Usulan Pendistribusian LPG Menggunakan Model Clustered Generalized Vehicle Routing Problem (CGVRP) dan Algoritma Dijkstra. Performa: Media Ilmiah Teknik Industri, 19(1). https://doi.org/10.20961/performa.19.1.41858
Ibnas, R., Alwi, W., & Taufik, A. (2019). Penerapan Metode Modified Distribution (MODI) dalam Meminimalisasi Biaya Transportasi Pengiriman Barang di PT. Tirta Makmur Perkasa. JURNAL MSA, 5(1), 5–10. https://doi.org/10.24252/msa.v7i1.7501
Krisna, D. K., & Sumiati (2023). Optimization of Teller Services Using Queuing Theory at XYZ Bank. IJIEM (Indonesian Journal of Industrial Engineering & Management), 4(3), 440-447. http://dx.doi.org/10.22441/ijiem.v4i3.21359
Korukoǧlu, S., & Balli, S. (2011). An Improved Vogel’s Approximation Method for the Transportation Problem. Mathematical and Computational Applications, 16(2), 370–381. https://doi.org/10.3390/mca16020370
Mussafi, N. S. (2016). Application of Cutting Stock Problem in Minimizing The Waste of Al-Quran Cover. Kaunia, 12(1), 17 - 22. https://doi.org/10.14421/kaunia.1036
Nahar, J., Rusyaman, E., & Putri, S. D. V. E. (2018). Application of improved Vogel’s approximation method in minimization of rice distribution costs of Perum BULOG. In IOP Conference Series: Materials Science and Engineering (Vol. 332, No. 1, p. 012027). IOP Publishing. DOI 10.1088/1757-899X/332/1/012027
Ratnasari, Y., Yuniarti, D., & Purnamasari, I. (2020). Optimization of Goods Distribution Using Vogel's Approximation Method and Stepping Stone Method. EKSPONENSIAL, 10(2), 165-174. https://jurnal.fmipa.unmul.ac.id/index.php/exponensial/article/view/575
Siang, J. J. (2014). Riset Operasi dalam Pendekatan Algoritmis (S. Suyantoro, Ed.; 2nd ed.). CV. Andi Offset.
Siregar, B. (2022). OPTIMASI: Program Linear dengan R. Diakses pada 10 November 2023 dari https://rpubs.com/dsciencelabs/optimasi2
Subakdo, W. A., & Nugroho, Y. A. (2016). In-Bound Dan Out-Bound Logistic pada Distribusi Lpg 3 Kg di Indonesia. Seminar Nasional Sains Dan Teknologi Fakultas Teknik Universitas Muhammadiyah Jakarta. https://jurnal.umj.ac.id/index.php/semnastek/article/view/749/694.
Trihudiyatmanto, M. (2018). Riset Operasi (Operation Research) & Penyelesaian Menggunakan Software WinQSB (M. Nasrudin, Ed.; Pertama). PT. Nasya Expanding Management.
Unit Ditjen Migas. (2023). Laporan Kinerja Tahun 2022 (Sub Koordinator Bagian Rencana dan Laporan, Ed.). Direktorat Jenderal Minyak dan Gas Bumi.
Wahyu, S. R., Rohima, A., Handayani, K. F., & Fauzi, M. (2021). Optimalisasi Biaya Distribusi Kain Mentah di PT PQR Menggunakan Metode VAM (Vogel’s Approximation Method) dan Lingo. Jurnal Bayesian: Jurnal Ilmiah Statistika Dan Ekonometrika, 1(2), 91–99. https://doi.org/10.46306/bay.v1i2.10
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
