Quality Control of Edamame Products Using Statistical Quality Control (SQC) and Failure Mode Effect Analysis (FMEA) Methods in PT. XYZ
DOI:
https://doi.org/10.22441/ijiem.v4i2.20550Kata Kunci:
Defect, Edamame, FMEA, SQCAbstrak
PT. XYZ is a company engaged in the frozen food processing industry. One such product is Edamame. In the Edamame production process, defects such as pest defects, color defects, pod defects and mechanical defects that affect quality are still found. The purpose of this study was to determine the proportion of defects that most often occur and the factors that cause defects and to provide suggestions for improving the quality of edamame. The methods used are Statistical Quality Control (SQC) and Failure Mode Effect Analysis (FMEA). The SQC tools include check sheets, statistics, histograms, pareto charts, scatter diagrams, control charts, and fishbone diagrams. Then continue the FMEA analysis for suggestions for corrective action. Based on the results of research on Statistical Quality Control (SQC) it is known that the most dominant defects in edamame are pests (39.9%), then color (25.5%), pods (25.2%), and mechanics (9.4%) ). Based on the results of research on Failure Mode Effect Analysis (FMEA) it is known that the highest cause of problems with RPN 360 is lack of sanitation. Suggestions for improvement that can be proposed namely. Scheduling cleaning of the work environment area and sterilizing production machines and equipment.Unduhan
Referensi
Akbar, D. C. 2018. Analisa Pengendalian Kualitas Produk Gula Kelapa Organik Dengan Menggunakan Statistical Quality Control (SQC) Pada PT. Pathbe Agronik Indonesia, Cilacap, Jawa Tengah. Skripsi. Jurusan Manajemen. Fakultas Ekonomi. Universitas Islam Indonesia. Yogyakarta.
Alfatiyah, R., Bastuti, S., & Kurnia, D. (2020). Implementation of statistical quality control to reduce Cacats in Mabell Nugget products (case study at Pt. Petra Sejahtera Abadi). IOP Conference Series: Materials Science and Engineering, 852(1), 12107.
Alfianto, Y. (2019). Analisis Penyebab Kecacatan Produk Weight A Handle Menggunakan Metode Fault Tree Analysis dan Failure Mode and Effect Analysis sebagai Rancangan Perbaikan Produk. JIEMS (Journal of Industrial Engineering and Management Systems), 12(2), 71–80. https://doi.org/10.30813/jiems.v12i2.1493
Andespa, I. (2020). Analisis Pengendalian Mutu Dengan Menggunakan Statistical Quality Control (Sqc) Pada Pt.Pratama Abadi Industri (Jx) Sukabumi. E-Jurnal Ekonomi Dan Bisnis Universitas Udayana, 2, 129. https://doi.org/10.24843/eeb.2020.v09.i02.p02
Andri, N. 2018. Pengendalian Kualitas Produk Baja Menggunakan Metode Statistical Quality Control (SQC) Dan Failure Mode Effect Analysis (FMEA) di PT. XYZ. Skripsi. Jurusan Teknik Industri. Fakultas Teknik. Universitas Sumatera Utara. Medan.
Anggriani, D. (2020). Nusantara ( Jurnal Ilmu Pengetahuan Sosial ) JEPANG. Nusantara: Jurnal Ilmu Pengetahuan Sosial, 7(2), 408–420.
Aprianto, T., Setiawan, I., & Purba, H. H. (2021). Implementasi metode Failure Mode and Effect Analysis pada Industri di Asia – Kajian Literature. Matrik, 21(2), 165. https://doi.org/10.30587/matrik.v21i2.2084
Arianti, M. S., Rahmawati, E., Prihatiningrum, D. R. R. Y., Magister, ), & Bisnis, A. (2020). Analisis Pengendalian Kualitas Produk Dengan Menggunakan Statistical Quality Control (Sqc) Pada Usaha Amplang Karya Bahari Di Samarinda. Edisi Juli-Desember, 9(2), 2541–1403.
Haryanto, I. I. S. (2019). Penerapan Metode Sqc ( Statistical Quality Control ) Untuk Mengetahui Kecacatan Produk Shuttlecock Pada Ud . Ardiel Shuttlecock. Valtech, 2(2), 186–191.
Jamil, N. F., . Y., & Maharani, A. (2019). Analisis Biaya Mutu dalam Pengendalian Produk Cacat. International Journal of Social Science and Business, 3(4), 516. https://doi.org/10.23887/ijssb.v3i4.21666
Pebrianti, S. A., Kusumah, S. H., & Yunita, N. (2021). Identifikasi Permasalahan Kualitas Garam Industri Di Pt Niaga Garam Cemerlang Menggunakan Check Sheet, Pareto Chart Dan Fishbone Analysis. Jurnal Ilmu Teknik Edition, 2(3), 79-86., 2(3), 79–86.
Putri, M. A., Chameloza, C., & Anggriani, R. (2021). Analisis Pengendalian Kualitas Produk Pengalengan Ikan Dengan Metode Statistical Quality Control (Studi Kasus: Pada CV. Pasific Harvest). Food Technology and Halal Science Journal, 4(2), 109–123. https://doi.org/10.22219/fths.v4i2.15603
Rahman, A., & Perdana, S. (2021). Analisis Perbaikan Kualitas Produk Carton Box di PT XYZ Dengan Metode DMAIC dan FMEA. Jurnal Optimasi Teknik Industri (JOTI), 3(1), 33–37. https://doi.org/10.30998/joti.v3i1.9287
Raman, R. S., & Basavaraj, Y. (2019). Quality improvement of capacitors through fishbone and pareto techniques. International Journal of Recent Technology and Engineering, 8(2), 2248–2252. https://doi.org/10.3940/ijrte.B2444.078219
Rinoza, M., Junaidi, & Kurniawan, F. A. (2021). Analisa RPN (Risk Priority Number) Terhadap Keandalan Komponen Mesin Kompresordouble Screw Menggunakan Metode FMEA di Pabrik Semen PT. XYZ. Buletin Utama Teknik, 17(1), 34–40. https://jurnal.uisu.ac.id/index.php/but/article/download/4311/3087
Rosyidi, M. R. (2020). Buku Ajar Pengendalian dan Penjaminan Mutu. Kota Malang. Ahlimedia Press.
Manik, A. 2020. Usulan Perbaikan Kualitas Meggunakan Statistical Quality Control (SQC) dan Fuzzy Failure Mode and Effect Analysis (FMEA) untuk Meningkatkan Kualitas Produk Seng di PT. Intan Nasional Iron Industri. Skripsi. Jurusan Teknik Industri. Fakultas Teknik. Universitas Sumatera Utara. Medan.
Selvamuthu, D. 2018. Introduction to Statistical Methods, Design of Experiments and Statistical Quality Control. Singapore. Springer.
Setiabudi, M. E., Vitasari, P., & Priyasmanu, T. (2020). Jumlah Produk Cacat Dengan Metode Statistical Quality Control Pada Umkm . Waris Shoes. Jurnal Valtech, 3(2), 211–218.
Setiawan, L., & Ida M. A. 2018. Analisis Pengendalian Proses Produksi Dengan Metode Statistical Quality Control Pada PT. Estwind Mandiri Semarang. Jurnal Ekonomi Manajemen dan Akutansi. Vol. 25, No. 44. pp 16-28.
Suharyanto, Herlina, R. L., & Mulyana, A. (2022). Analisis Pengendalian Kualitas Produk Waring Dengan Metode Seven Tools Di Cv. Kas Sumedang. Jurnal TEDC, 16(1), 37–49.
Suherman, A., & Cahyana, B. J. (2019). Pengendalian Kualitas dengan Metode Failure Mode Effect And Analysis (FMEA) dan Pendekatan Kaizen untuk Mengurangi Jumlah Kecacatan dan Penyebabnya. Jurnal UMJ, 16, 1–9.
Supriyadi, E. (2021). Analisis Pengendalian Kualitas Produk dengan Statistical Process Control (SPC). Tangerang Selatan. Pascal Books.
Tang, H. 2022. Quality Planning and Asssurance : Principles, Approaches, and Methods for Product and Service Development. Hoboken. John Wiley & Sons, Inc.
Walujo, D. A. (2020). Pengendalian Kualitas. Surabaya. Scopindo Media Pustaka
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
