Analysis of Quality Control of Bread Products Using the Seven Tools Method and Kaizen in Banana Bread Shop Jombang
DOI:
https://doi.org/10.22441/ijiem.v5i2.22205Keywords:
Quality control, Seven tools, Repair, kAIZENAbstract
Banana Bread Shop Jombang is a micro company engaged in the food industry by producing sweet bread with various variants. However, in the production process there are still defects in the product, there by reducing the quality of the bread production. The purpose of this study was to minimize defects in Mexican chocolate bread products produced by Banana Bread Shop Jombang by conducting an analysis using the seven tools and kaizen methods in the production process. The data collection technique used was interview, observation and documentation methods during March-May 2023. The results of the analysis showed that the types of defects that occurred in Mexican chocolate bread products were non-standard forms, burnt, flat, and cut by the packaging machine. Based on the four types of disability, flat is the most dominant with a total of 2.198 pcs. The occurrence of defects in mexico chocolate bakery products is caused by 5M factors: man, methods, machines, materials, and milieu. Improvements made to minimize the occurrence of defects in Mexican chocolate bread are by implementing the kaizen method.Downloads
References
Alfadilah, H., Hadining, A. F., & Hamdani, H. (2022). Pengendalian Kualitas Produk Cacat Piece Pivot pada PT. Trijaya Teknik Karawang Menggunakan Seven tool dan Analisis Kaizen. Jurnal Serambi Engineering, 7(1), 2814–2822. https://doi.org/10.32672/jse.v7i1.3667
Ansori, F. A. (2023). Penerapan Metode Seven Tools pada Pengendalian Kualitas Produk Cacat di PT XYZ. 8(2), 5970–5978. https://doi.org/10.32672/jse.v8i2.5991
Butanil, A. et al. (2019). Usulan Pengendalian Kualitas Produk dengan Metode Seven Tools dan Kaizen Sebagai Upaya Mengendalikan Tingkat Kerusakan Produk di PT Pri Adhi Husada. Jurnal REKAVASI, 7(1). https://ejournal.akprind.ac.id/index.php/rekavasi/article/view/2223
Dewi, A. A., Yuamita, F., Sains, F., Industri, J. T., & Yogyakarta, U. T. (2022). Pengendalian Kualitas Pada Produksi Air Minum Dalam Kemasan Botol 330 Ml Menggunakan Metode Failure Mode Effect Analysis ( FMEA ) di PDAM Tirta Sembada. 1(I), 15–21. https://doi.org/10.55826/tmit.v1iI.4
Hairiyah, N., Amalia, R. R., & Luliyanti, E. (2019). Analisis Statistical Quality Control (SQC) pada Produksi Roti di Aremania Bakery. Industria: Jurnal Teknologi Dan Manajemen Agroindustri, 8(1), 41–48. https://doi.org/10.21776/ub.industria.2019.008.01.5
Indrawansyah, I., & Jutika Cahyana, B. (2019). Analisa Kualitas Proses Produksi Cacat Uji Bocor Wafer dengan menggunakan Metode Six Sigma serta Kaizen sebagai Upaya Mengurangi Produk Cacat Di PT. XYZ. Seminar Nasional Sains Dan Teknologi, 6, 1–8. https://jurnal.umj.ac.id/index.php/semnastek/article/view/5214
Nofal Azhar Pratama, Marchimal Zulfian Dito, Otniel Odi Kurniawan, & Ari Zaqi Al-Faritsy. (2023). Analisis Pengendalian Kualitas Dengan Metode Seven Tools Dan Kaizen dalam Upaya Mengurangi Tingkat Kecacatan Produk. Jurnal Teknologi dan Manajemen Industri Terapan, 2(2), 53–62. https://doi.org/10.55826/tmit.v2i1.111
Novianti, F. (2023). Quality Control of Edamame Products Using Statistical Quality Control ( SQC ) and Failure Mode Effect Analysis ( FMEA ) Methods in. 4(2), 221–230. https://doi.org/10.22441/ijiem.v4i2.20550
Rahayu, Puji & Supono, J. (2020). Analisis Pengendalian Kualitas Produk Menggunakan Metode Statistical Quality Control ( SQC ) pada Divisi Curing Plant di PT . Gajah Tunggal, Tbk. 9(1). https://doi.org/10.31000/jt.v9i1.2278
Rufaidah, A. & M. R. R. (2020). Analisis Pengendalian Kualitas dengan metode Seven tools di PT. XYZ. 08(02), 1–75. https://doi.org/10.35308/jopt.v8i2.6128
Santos, G. Dos, Mawadati, A., Susetyo, J., & Industri, J. T. (2022). Analisis Pengendalian Kualitas Produk Dengan Menggunakan Metode Seven Tools Dan Kaizen Untuk Mengurangi Kecacatan Produk di CV. Solusi Offset Yogyakarta. Jurnal REKAVASI, 10(2), 56–66. https://doi.org/10.34151/rekavasi.v10i2.4208
Saori, S. et. al. (2021). Analisa Pengendalian Kualitas pada Home Industri Makanan. 3(2), 396–405. https://doi.org/10.46799/syntax-idea.v3i2.1052
Sejati, T. F., Susetyo, J., & Yusuf, M. (2023). Pengendalian Kualitas Kain Katun Menggunakan Metode Statistical Quality Control dan Kaizen Sebagai Upaya Mengurangi Produk Cacat ( Studi Kasus : PT . Kusuma Mulia Plasindo Infitex ). 11(1), 27–36. https://doi.org/10.55606/jtmei.v2i2.1859
Sutrisno, B. (2022). A Systematic Literature Review of Quality Seven Tools. IJIEM - Indonesian Journal of Industrial Engineering and Management, 3(1), 72. https://doi.org/10.22441/ijiem.v3i1.13551
Tri, D., Rakhmanita, A., & Anggraini, A. (2019). Implementasi Kaizen Dalam Meningkatkan Kinerja Pada Perusahaan Manufaktur Di Tangerang. Jurnal Ecodemica: Jurnal Ekonomi, Manajemen, Dan Bisnis, 3(2), 198–206. https://doi.org/10.31311/jeco.v3i2.6077
Wardana, A. D., & Nina Mahbubah. (2022). Integrating Seven Tools and Kaizen Approach in Evaluating Defects on Tofu Production Process. Jurnal E-Komtek (Elektro-Komputer-Teknik), 6(1), 101–113. https://doi.org/10.37339/e-komtek.v6i1.879
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
