Soybean Inventory Management at Gesit Tahu Factory Using the Economic Order Quantity (EOQ) Method
DOI:
https://doi.org/10.22441/ijiem.v5i2.22938Kata Kunci:
EOQ, Raw materials, Supplies, Efficient, Ordering costAbstrak
Gesit Tahu is a small-scale factory engaged in the tofu industry, in the production process is closely related to the supply of the main raw material, namely soybeans. Gesit Tahu has not been optimal in controlling the level of raw material inventory where this factory has experienced a shortage of soybean inventory due to high demand, so it requires a method that can optimize raw material purchases and minimize inventory costs, the right method in solving this problem is using the Economic Order Quantity (EOQ) method. The purpose of this study is to determine the inventory control of Gesit Tahu soybean raw materials by comparing the current inventory management policy at the factory and using the EOQ method. The results of this study that inventory control is more efficient using the EOQ method, it is proven that it can make savings from the cost factor that must be incurred, it can be seen that if the Gesit Tahu factory applies the EOQ method, namely IDR 2,223,077,461, it is a minimum compared to the factory policy method within one year, which is IDR 2,223,619,662. The optimal order quantity for soybean needs is 72.87 sacks (73 sacks) for one order. The frequency of ordering soybean needs is 43.49 or 44 times/year. The calculation of safety stock to anticipate unexpected shortages is 1.64 sacks or 2 sacks. The calculation of the reorder point obtained to determine the point at which the order is placed again so that the ordered goods arrive on time before the inventory runs out is 21.93 sacks or 22 sacks.Unduhan
Referensi
Aldillah, R. (2015). Proyeksi produksi dan konsumsi kedelai Indonesia. Jurnal Ekonomi Kuantitatif Terapan, 8(1), 44324.
Aman, S., Fitria, H., & Hakim, C. B. (2023). Analisa Peramalan Penjualan Tas Kerajinan Ekspor Dengan Metode Moving Average Di CV. Sindocraft. Jurnal Teknologi dan Manajemen Industri, 4(1), 1-6.
Badan Pusat Statistik Jakarta Pusat. (2022). Rata-Rata Konsumsi Per kapita Seminggu 2007-2022. Retrieved October 1, 2022, from Badan Pusat Statistik website: https://www.bps.go.id/subject/5/konsumsi-dan-pengeluaran.html
Bahagia, S. N. (2006). Sistem Inventor. Bandung: ITB Press.
Daud, M. N. (2017). Analisis Pengendalian Persediaan Bahan Baku Produksi Roti Wilton Kualasimpang. Jurnal Samudra Ekonomi Dan Bisnis, 8(2), 760–774. https://doi.org/10.33059/jseb.v8i2.434
Lahu, E. P. L., & Sumarauw, J. S. B. (2017). Analisis Pengendalian Persediaan Bahan Baku Guna Meminimalkan Biaya Persediaan pada Dunkin Donuts Manado. Jurnal EMBA, 5(3), 4175–4184. https://doi.org/10.35794/emba.5.3.2017.18394
Lusiana, A., & Yuliarty, P. (2020). Penerapan Metode Peramalan (Forecasting) pada Permintaan Atap di PT X. Industri Inovatif : Jurnal Teknik Industri, 10(1), 11–20. https://doi.org/10.36040/industri.v10i1.2530
Hudori, M. (2018). Formulasi Model Safety Stock dan Reorder Point untuk Berbagai Kondisi Persediaan Material. Jurnal Citra Widya Edukasi, 10(3), 217-224.
Makridakis, S., Wheelwright, S. C., & McGee, V. E. (1993). Metode dan Aplikasi Peramalan (2nd ed.; U. S. Andriyanto & A. Basith, Trans.). Jakarta: Erlangga.
Rabbani, K. J., Wahyuda, W., & Sitania, F. D. (2022). Analisis Pengendalian Persediaan Kedelai pada PRIMKOPTI Guna Memenuhi Kebutuhan Produksi Industri Tahu Tempe di Balikpapan. G-Tech, 6(2), 284–294. https://doi.org/10.33379/gtech.v6i2.1709
Rusdiana, A. (2014). Manajemen Operasi (p. 402). Bandung: CV. Pustaka Setia.
Ryando, D., & Susanti, W. (2019). Penerapan Metode Economic Order Quantity (EOQ) untuk menentukan Safety Stock dan Reorder Point (Studi Kasus: PT. Sinar Glassindo Jaya). Jurnal Mahasiswa Aplikasi Teknologi Komputer dan Informasi (JMApTeKsi), 1(1), 76-84.
Susanti, S., & Arief, K. (2021). Implementasi Just In Time System Dalam Meningkatkan Efisiensi Biaya Persediaan Bahan Baku. Indonesian Accounting Literacy Journal, 1(3), 621–636. https://doi.org/10.35313/ialj.v1i3.3302
Vikaliana, R., Sofian, Y., Solihati, N., Adji, D. B., & Maulia, S. S. (2020). Manajemen Persediaan. Media Sains Indonesia.
Wiharja, A. F., & Ningrum, H. F. (2020). Analisis Prediksi Penjualan Produk PT. Joenoes Ikamulya Menggunakan 4 Metode Peramalan Time Series. Jurnal Bisnisman : Riset Bisnis Dan Manajemen, 2(1), 43–51. https://doi.org/10.52005/bisnisman.v2i1.23
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
