Pengaruh kapasitas cavitation air flotation terhadap penurunan TSS berdasarkan baku mutu air limbah untuk kegiatan industri di PT. X
DOI:
https://doi.org/10.22441/jonem.v1i2.14797Keywords:
Limbah Cair, Effluent Treatment Plant, Cavitation Air Flotation, Total Suspended SolidAbstract
Effluent Treatment Plant (ETP) is an environmentally based regional waste treatment system that aims to treat liquid waste so that it can produce waste that meets quality standards. Liquid waste that cannot be treated properly can result in environmental pollution. The research methodology used is a method of observation study by direct observation including the processing process in the ETP plant, the data collected is calculated based on the parameters of liquid waste before and after processing. From the data there are several days that show that only 80% of waste can be treated on ETP from the total waste sent from the production plant. This has an impact on the quality of TSS (Total Suspended Solid) parameters treated at CAF experiencing outspec of 20.79% of the operational standards of TSS parameters in PT X. Based on the results of research found that CAF (Cavitation Air Flotation) capacity is less maximal when the flowrate of waste to be treated is high so that the treatment capacity in ETP cannot keep up with the amount of waste sent from the production plant. This can cause the level in the accident pond and equalization pond high and eventually result in wastewater overflowing into the environment so that from this analysis process is obtained the proposed improvement of the process to improve the performance of IPAL is to add CAF to the pre-treatment process.
Downloads
References
H. Hamid and B. Pramudyanto, “Pengawasan industri dalam pengendalian pencemaran lingkungan”. Jakarta: Granit, 2007.
Darwin Yunus Nasution, “Pengolahan Limbah Cair Berasal Dari Kolam Akhir (Final Pond) Dengan Proses Koagulasi Melalui Elektrolisis” J. Sains Kim., vol. Vol 8,N. 2, pp. 38–40, 2004.
Kristanto, Philip. “Ekologi Industri”. Yogyakarta : Andi Yogyakarta, 2002.
A. D. A. N. Aerob, “Jurnal Ilmiah Universitas Batanghari Jambi Vol.13 No.4 Tahun 2013 Karakteristik Limbah Cair Pabrik Kelapa Sawit Pada Proses Pengolahan Anaerob Dan Aerob Ida Nursanti 1,” J. Ilm. Univ. Batanghari Jambi, vol. 13, no. 4, pp. 67–73, 2013.
Pulungan, A. S. “Analisis Pengelolaan Limbah Cair Kelapa Sawit Pada PT X Tahun 2017” .Skripsi. Medan : Universitas Sumatera Utara. 2017.
B. Chandra, “Pengantar Kesehatan Lingkungan”, Cet 2012. Jakarta EGC, 2016.
Ginting, Ir. Perdana. “Sistem Pengelolaan Lingkungan dan Limbah Industri”, Cetakan pertama. Bandung: Yrama Widya. 2007.
S. Romadhonah and C. Arif, “Analisis Kualitas Air dan Removal Efficiency Wastewater Treatment Plant (WWTP) di PT. Indonesia Power UPJP Priok Jakarata (Water Quality and Removal Efficiency Analysis of Wastewater Treatment Plant (WWTP) in PT. Indonesia Power UPJP Priok),” J. Tek. Sipil dan Lingkung., vol. 5, no. 2, pp. 69–78, 2021, doi: 10.29244/jsil.5.2.69-78.
M. F. Natsir, M. Selomo, and R. La Ane, “Efektifitas Drum Of Wastewater Treatment (DOWT) Dalam Mereduksi Kadar Phosphat Dan Nitrit Limbah Cair Domestik 2019,” J. Nas. Ilmu Kesehat., vol. 1, no. 69, pp. 1–16, 2019, [Online]. Available: journal.unhas.ac.id.
Muliari and I. Zulfahmi, “Dampak Limbah Cair Kelapa Sawit Terhadap Komunitas Fitoplankton di Sungai Krueng Mane Kabupaten Aceh Utara (Impact),” J. Perikan. dan Kelaut., vol. 6, no. 2, pp. 137–146, 2016, [Online]. Available: https://pdfs.semanticscholar.org/9ab4/51db5978aed65c5c3b406b9a9ef7d03fbb57.pdf.
D. Cahyadhi, “Pemanfaatan Limbah Lumpur (Sludge) Wastewater Treatment Plant Pt.X Sebagai Bahan Baku Kompos,” J. Tek. Mesin, vol. 5, no. 1, p. 31, 2016, doi: 10.22441/jtm.v5i1.708.
W. Hanim, F. Fadhliani, and S. G. Wibowo, “Pengolahan Limbah Cair di PMKS PT Sisirau Desa Sidodadi Kecamatan Kejuruan Muda Kabupaten Aceh Tamiang,” J. Enviscience, vol. 4, no. 2, p. 67, 2020, doi: 10.30736/4ijev.v4iss2.198.
B. J. Surbakti, “Karakteristik Limbah Cair Hasil Pengolahan Sistem Lumpur Aktif pada Pabrik Kelapa Sawit PTPN II Tanjung Morawa , Kebun Sawit Seberang,” Biol. Samudra, vol. 2, no. 2, p. 96, 2020, [Online]. Available: https://ejurnalunsam.id/index.php/jbs/article/download/2307/1918.
B. Rahadi, R. Wirosoedarmo, and A. Harera, “SISTEM ANAEROBIK-AEROBIK PADA PENGOLAHAN LIMBAH INDUSTRI TAHU UNTUK MENURUNKAN KADAR BOD5, COD, DAN TSS,” J. Sumberd. Alam dan Lingkung., pp. 17–26, 2018.
Nurbana, A. “Cara menurunkan TSS dalam air limbah,”. 2015, [Online]. Available: http://www.olah-air.com/2015/12/cara-menurunkan-tss-total-suspended.html.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment. The Copyright Transfer Agreement (CTA) Form is able to download in CTA Form
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. Copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above-mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the author's personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
