Faktor yang Mempengaruhi Kenaikan Biaya Proyek MRT Jakarta Fase-1 Menggunakan Pendekatan Logika Fuzzy
DOI:
https://doi.org/10.22441/jrs.2023.v12.i2.01Keywords:
Kenaikan Biaya, Logika Fuzzy, MRT, Faktor, RIIAbstract
Kenaikan biaya merupakan fenomena yang sangat sering terjadi dan hampir terkait dengan semua proyek industri konstruksi. Analisis alasan pembebanan biaya proyek konstruksi merupakan langkah penting untuk memperbaiki sistem estimasi biaya yang ada dan dapat digunakan untuk menentukan area dimana perbaikan terbesar dapat diperoleh. Indonesia memiliki pengalaman baru terkait pelaksanaan proyek MRT Jakarta Fase-1 yang tentunya masih terdapat berbagai kekurangan dalam perencanaannya dan mengalami kendala ketika pelaksanaannya yang salah satunya berakibat pada kenaikan biaya proyek. Penelitian ini difokuskan untuk mengetahui faktor-faktor yang berpengaruh terhadap kenaikan biaya pada MRT Jakarta Fase-1 dengan menggunakan pendekatan logika fuzzy. Data-data yang dikumpulkan diperoleh langsung dari pihak MRT Jakarta dan penyebaran kuesioner kepada 35 orang yang kompeten terkait pembahasan penelitian ini. Hasil pada penelitian ini adalah Faktor Manajemen merupakan faktor yang paling berpengaruh terhadap Kenaikan Biaya dibandingkan dengan Faktor Teknis. Jika salah satu kondisi Faktor Teknis (Besar, Sedang, Kecil) disandingkan dengan Faktor Manajemen yang tidak efektif maka Kenaikan Biaya sudah berada pada level tinggi. Melihat hasil pada penelitian ini, maka Peneliti berharap penelitian ini dapat bermanfaat untuk pihak-pihak terkait sebagai bahan pertimbangan dalam merencanakan hingga pelaksanaan pembangunan MRT Jakarta fase berikutnya.
Downloads
References
Azhar, N., Farooqui, R. U., & Ahmed, S. M. (2008). “Cost Overrun Factors in Construction Education, Research and Practice, 499. Construction in Nigeria”. Interdiciplinary Journal of Contemporary. Construction Industry of Pakistan”. Advancing and Integrating
Creedy, G. D., Skitmore, M., & Wong, J. K. (2010). Evaluation of Risk Factors Leading to Cost Overrun in Delivery of Highway Construction Projects. ASCE, 528-537.
Danisworo, B., & Latief, Y. (2019). Estimation model of Jakarta MRT phase 1 project cost overrun for the risk based next phase project funding purpose. IOP Conference Series: Earth and Environmental Science, 258(1). https://doi.org/10.1088/1755-1315/258/1/012049
Dikmen, I., Birgonul, M. T., & Han, S. (2007). Using fuzzy risk assessment to rate cost overrun risk in international construction projects. International Journal of Project Management, 25(5), 494–505. https://doi.org/10.1016/j.ijproman.2006.12.002
El-Ahwal, M., El- Attar, S., & Abdel-Hafez, W. (2016). Factors Leading to Cost Overrun Occurrence in Construction Projects. Port-Said Engineering Research Journal, 20(1), 71–77. https://doi.org/10.21608/pserj.2016.33641
Larsen, J. K., Shen, G. Q., & Lindhard, S. M. (2016). Factors Affecting Schedule Delay, Cost Overrun, and Quality Level in Public Construction Projects. ASCE, 32
(Ming-Teh Wang dan Hui-Yu Chou, 2003). Risk Allocation and Risk Handling of Highway Projects in Taiwan. ASCE, 2
Moon, H., Williams, T. P., Lee, H. S., & Park, M. (2020). Predicting project cost overrun levels in bidding stage using ensemble learning. Journal of Asian Architecture and Building Engineering, 00(00), 1–14. https://doi.org/10.1080/13467581.2020.1765171
Azhar, N., Farooqui, R. U., & Ahmed, S. M. (2008). “Cost Overrun Factors in Construction Education, Research and Practice, 499. Construction in Nigeria”. Interdiciplinary Journal of Contemporary. Construction Industry of Pakistan”. Advancing and Integrating
Creedy, G. D., Skitmore, M., & Wong, J. K. (2010). Evaluation of Risk Factors Leading to Cost Overrun in Delivery of Highway Construction Projects. ASCE, 528-537.
Danisworo, B., & Latief, Y. (2019). Estimation model of Jakarta MRT phase 1 project cost overrun for the risk based next phase project funding purpose. IOP Conference Series: Earth and Environmental Science, 258(1). https://doi.org/10.1088/1755-1315/258/1/012049
Dikmen, I., Birgonul, M. T., & Han, S. (2007). Using fuzzy risk assessment to rate cost overrun risk in international construction projects. International Journal of Project Management, 25(5), 494–505. https://doi.org/10.1016/j.ijproman.2006.12.002
El-Ahwal, M., El- Attar, S., & Abdel-Hafez, W. (2016). Factors Leading to Cost Overrun Occurrence in Construction Projects. Port-Said Engineering Research Journal, 20(1), 71–77. https://doi.org/10.21608/pserj.2016.33641
Larsen, J. K., Shen, G. Q., & Lindhard, S. M. (2016). Factors Affecting Schedule Delay, Cost Overrun, and Quality Level in Public Construction Projects. ASCE, 32
(Ming-Teh Wang dan Hui-Yu Chou, 2003). Risk Allocation and Risk Handling of Highway Projects in Taiwan. ASCE, 2
Moon, H., Williams, T. P., Lee, H. S., & Park, M. (2020). Predicting project cost overrun levels in bidding stage using ensemble learning. Journal of Asian Architecture and Building Engineering, 00(00), 1–14. https://doi.org/10.1080/13467581.2020.1765171
Mr. Manoj Thorat, P. B. V. B. (2015). Cost Overrun Assessment Model in Highway Construction Projects Using Fuzzy Uncertainty Analysis. International Journal of Engineering Research and Technology (IJERT), 4(4), 568–574. www.ijert.org
Vu, H. A., Wang, J., Min, L., Mai, S. H., & Nguyen, H. P. (2016). Research on Cost Overrun Risk of Construction Phase of Vietnam Highway International Contracting Project. Scientific Research Publishing Inc., 86-98.
Wang, L.X. (1997) A Course in Fuzzy Systems and Control. Prentice-Hall, Englewood Cliffs.
Nurhayati. (2010). Manajemen Proyek. Cetakan Pertama, Graha Ilmu. Yogyakarta.
Ringkasan Eksekutif Laporan Akhir Proyek MRT Jakarta Fase- 1 (2020)
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
