Prototipe Sistem Radar Pendeteksi Banjir Berbasis Web Server
DOI:
https://doi.org/10.22441/jte.2022.v13i3.001Kata Kunci:
Banjir, Ultrasonik, Radar, sensorAbstrak
Abstrak—Tujuan dari penelitian ini adalah untuk mengembangkan sistem pemantauan banjir dan peringatan dini secara real-time. Teknik penginderaan ultrasonic sebagai RADAR(Radio Detection and Ranging) banyak digunakan di berbagai bidang teknik dan ilmu dasar. Salah satu keuntungan dari penginderaan ultrasonik adalah kemampuannya yang luar biasa untuk menyelidiki di dalam objektif secara non-destruktif karena ultrasonik dapat merambat melalui berbagai jenis media termasuk padatan, cairan dan gas. Studi ini hanya berfokus pada deteksi ketinggian air dan sistem peringatan dini (melalui situs web) yang memperingatkan lembaga dan individu terkait akan potensi kejadian banjir. Selain itu, sistem inquiry juga dimasukkan dalam penelitian ini agar lebih interaktif dimana individu dalam masyarakat dapat menanyakan ketinggian air aktual dan status daerah atau lokasi yang diinginkan terkena banjir melalui web. Kajian ini bertujuan untuk membantu warga agar siap dan berpengetahuan ketika terjadi banjir. Inovasi studi ini berada pada pemanfaatan ESP 32, sensor ultrasonic dan monitoring melalui web dalam membantu pemangku kepentingan untuk mengurangi korban terkait banjir. Artikel ini bertujuan untuk membantu daerah-daerah rawan banjir yang umum terjadi.
Unduhan
Referensi
M. M. Yusuf, “Sistem Informasi Pemantauan Kenaikan Air Untuk Mengatasi Bencana Banjir Dengan Arduino - UTY Open Access,” uty.ac.id, Mar. 2020.
A. Muzakky, A. Nurhadi, A. Nurdiansyah, G. Wicaksana, and Istiadi, “Perancangan Sistem Deteksi Banjir Berbasis IoT,” Conference on Innovation and Application of Science and Technology (CIASTECH), vol. 1, no. 1, pp. 660–667, 2018.
H. D. Prasetya, “Prototipe Sistem Radar Dan Pemandu Peluru Kendali Otomatis Berbasis Mikrokontroler Atmega 328,” ugm.ac.id, 2013.
L. Renaldi, Sugondo Hadiyoso, and Dadan Nur Ramadan, “Prototipe Radar Sebagai Pendeteksi Objek,” eProceedings of Applied Science, vol. 3, no. 3, 2017.
A. Fortrandyka, “Perancangan Prototipe Radar Sebagai Pendeteksi Keberadaan Objek”, 2018.
L. Renaldi, S. Hadiyoso, and D. N. Ramadan, “Purwarupa Radar sebagai Pendeteksi Benda Diam menggunakan Ultrasonik,” ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika, vol. 6, no. 3, p. 317, Oct. 2018, doi: 10.26760/elkomika.v6i3.317.
N. Pratama, U. Darusalam, and N. D. Nathasia, “Perancangan Sistem Monitoring Ketinggian Air Sebagai Pendeteksi Banjir Berbasis IoT Menggunakan Sensor Ultrasonik,” Jurnal Media Informatika Budidarma, vol. 4, no. 1, p. 117, Jan. 2020, doi: 10.30865/mib.v4i1.1905.
M. Andayani, W. Indrasari, and Bambang. H. Iswanto, “Kalibrasi Sensor Ultrasonik HC-SR04 Sebagai Sensor Pendeteksi Jarak Pada Prototipe Sistem Peringatan Dini Bencana Banjir,” Prosiding Seminar Nasional Fisika (E-Journal) SNF2016 UNJ, 2016, doi: 10.21009/0305020109.
B. Putra, “Bagaimana Cara Kerja Radar”, Juli 2020
R. Sulistyowati, H. A. Sujono, and A. K. Musthofa, “Sistem Pendeteksi Banjir Berbasis Sensor Ultrasonik Dan Mikrokontroler Dengan Media Komunikasi SMS Gate Way”, Seminar Nasional Sains dan Teknologi Terapan III, Institut Teknologi Adhi Tama Surabaya, 2015, ISBN 978-602-98569-1-0
A. Mardhyiana and A. Harintaka, “Pemanfaatan Citra SAR (Synthetic Aperture Radar) Sentinel-1 untuk Identifikasi Genangan Banjir Wilayah DKI Jakarta pada Januari 2020”, Universitas Gadjah Mada, 2021.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
