Penerapan Inovatif Metode ROSA dalam Analisis Postur Kerja pada Karyawan Kantor
DOI:
https://doi.org/10.22441/pasti.2024.v18i2.008Keywords:
Work Posture, Office Employees, Musculoskeletal Disorder, ROSAAbstract
Dalam konteks lingkungan kerja kantor modern, postur kerja yang tidak ergonomis seringkali menjadi faktor kesehatan yang terabaikan. Sebagian besar karyawan kantor mengalami gangguan muskuloskeletal akibat dari postur duduk yang buruk selama berjam-jam. Oleh karena itu, identifikasi penyebab dan implementasi solusi perbaikan menjadi hal yang esensial. Penelitian ini diarahkan untuk menerapkan serta menilai keefektifan Metode Rapid Office Strain Assessment (ROSA) sebagai alat analisis postur kerja yang inovatif bagi pekerja kantor. Metode ROSA dipilih karena kemampuannya dalam mengidentifikasi faktor risiko terkait dengan Gangguan Muskuloskeletal. Hasil penelitian menunjukkan bahwa terdapat 7 pekerja dengan skor akhir 8, 7 pekerja dengan skor akhir 7, dan 1 pekerja dengan skor akhir 6, semuanya berisiko tinggi dan memerlukan tindakan perbaikan. Penyebab utama risiko tinggi ini adalah fasilitas kerja yang belum mendukung, yang mengurangi kenyamanan selama bekerja, dan kurangnya kesadaran pekerja mengenai pentingnya ergonomi dalam bekerja. Solusi yang diimplementasikan meliputi pembaruan fasilitas, penerapan prinsip ergonomi, serta pelatihan dan sosialisasi tentang ergonomi kantor kepada para pekerja.
Downloads
References
Adelino, M. I., Susriyati, & Irwan, M. (2023). Evaluasi Risiko Postur Kerja Pegawai Administrasi Menggunakan Metode SNQ dan ROSA di CV. Rempah Sari. Jurnal Teknologi, 13(1), 33–38. https://doi.org/10.35134/jitekin.v13i1.90
Alfatiyah, R. (2020). Penilaian Postur Kerja Dengan SNQ (Standart Nordic Quistionnare) Dan Metode Rosa (Rapid Office Strain Assessment) Pada Instansi Susanto Education. Jurnal Teknik Industri, 10(1), 78–84. https://doi.org/10.25105/jti.v10i1.8391
Amri, A. N., & Putra, B. I. (2022). ERGONOMIC RISK ANALYSIS OF MUSCULOSKELETAL DISORDERS (MSDs) USING ROSA AND REBA METHODS ON ADMINISTRATIVE EMPLOYEES FACULTY OF SCIENCE. Journal of Applied Engineering and Technological Science, 4(1), 104–110. https://doi.org/10.37385/jaets.v4i1.954
Bastuti, S., & Zulziar, M. (2020). Analisis Postur Kerja Dengan Metode Owas (Ovako Working Posture Analysis System) Dan Qec (Quick Exposure Checklist) Untuk Mengurangi Terjadinya Kelelahan Musculoskeletal Disorders Di Pt. Truva Pasifik. JITMI (Jurnal Ilmiah Teknik Dan Manajemen Industri), 2(2), 116. https://doi.org/10.32493/jitmi.v2i2.y2019.p116-125
de Barros, F. C., Moriguchi, C. S., Chaves, T. C., Andrews, D. M., Sonne, M., & de Oliveira Sato, T. (2022). Usefulness of the Rapid Office Strain Assessment (ROSA) tool in detecting differences before and after an ergonomics intervention. BMC Musculoskeletal Disorders, 23(1), 1–12. https://doi.org/10.1186/s12891-022-05490-8
Fardoun, H. M., Alghazzawi, D. M., & Romero-López, S. (2019). PostureUp: A system to rehab and prevent postural issues at the office. ACM International Conference Proceeding Series, 175–178. https://doi.org/10.1145/3364138.3364175
Handriawan, M., Erliana, K., & Yuliarty, P. (2023). Analisis Postur Tubuh Pekerja Departemen Staining Finishing Menggunakan Metode Reba (Rapid Entire Body Assessment) Di Pt Berdikari Meubel Nusantara. Jurnal PASTI (Penelitian Dan Aplikasi Sistem Dan Teknik Industri), 16(3), 335. https://doi.org/10.22441/pasti.2022.v16i3.008
Hosseini-Koukamari, P., Ghaffari, M., Tavafian, S. S., & Ramezankhani, A. (2021). Using Theoretical Domains Framework for Exploring Appropriate Sitting Posture Determinants Among Office Workers: A Content Analysis Study. Health Scope, 10(1). https://doi.org/10.5812/jhealthscope.108354
Madani, H., & Pratiwi, I. (2021). Analisis Work-Related Musculoskeletal Disorders (WMSDS) dan Postur Kerja Karyawan Customer Service Bank Menggunakan Metode Nordic Body Map (NBM) dan Rapid Office Strain Assessment (ROSA). Simposium Nasional RAPI XX, 7, 99–108. https://proceedings.ums.ac.id/index.php/rapi/article/view/147
Pramono, T., Sayuti, A. M., Gaffar, M. R., & Puspitaningrum, R. A. (2022). Penilaian Risiko Ergonomi Pada Lingkungan Kerja Perkantoran Menggunakan Metode Rapid Office Strain Assessment (ROSA). Jurnal Pendidikan Administrasi Perkantoran (JPAP), 10(3), 246–255. https://doi.org/10.26740/jpap.v10n3.p246-255
Primasari, M. S., & Kurnianingtyas, C. D. (2022). Analisis Postur Kerja Dan Manual Material Handling Pada Aktivitas Pemindahan Material Di Bengkel Bubut Bp. Jurnal PASTI (Penelitian Dan Aplikasi Sistem Dan Teknik Industri), 16(2), 124. https://doi.org/10.22441/pasti.2022.v16i2.001
Setiawan, A. I., & Mahbubah, N. (2023). Deteksi Kelelahan Otot Berbasis Postur Kerja Operator Computer Control Room Menggunakan Integrasi Metode NBM dan ROSA DI PT. XYZ. Jurnal Rekayasa Industri (JRI), 5(1), 60–72. https://doi.org/10.37631/jri.v5i1.845
Tahernejad, S., Razeghi, M., Abdoli-Eramaki, M., Parsaei, H., Seif, M., & Choobineh, A. (2023). Recommended maximum holding time of common static sitting postures of office workers. International Journal of Occupational Safety and Ergonomics, 29(2), 847–854. https://doi.org/10.1080/10803548.2022.2085418
Theofany Simanjuntak, S., & Susanto, N. (2022). Analisis Postur Pekerja Untuk Mengetahui Tingkat Risiko Kerja Dengan Metode Rosa (Studi Kasus : Kantor Pusat Pt Pertamina Ep). Industrial Engineering Online Journal, 9(4).
Widiyawati, S., Lukodono, R. P., Lustyana, A. T., & Pradana, I. A. (2020). Investigation of the risk of daily officer work posture based on rapid upper limb assessment (rula) method. International Journal of Human Movement and Sports Sciences, 8(1), 24–31. https://doi.org/10.13189/saj.2020.080103
Yul, F. A. (2021). Analisis Postur Kerja Operator Pemanen Kelapa Sawit dengan Metode Quick Exposure Check (QEC). Jurnal Surya Teknika, 8(1), 222–226. https://doi.org/10.37859/jst.v8i1.2587
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
