PENGUKURAN KINERJA MESIN EXTRUDER 160 PADA PRODUKSI KABEL MEDIUM VOLTAGE (MV) DALAM FASE OUTER SHEATING
DOI:
https://doi.org/10.22441/pasti.2021.v15i3.005Keywords:
Productivity, OEE, Pareto Diagrams, Fishbone Diagrams, FMEAAbstract
Mesin Extruder 160 dapat dianalisis kinerjanya dengan metode overall equipment efficiency (OEE). Untuk mengetahui nilai kerusakan tertinggi pada mesin extruder 160 dapat diperoleh dengan metode Failure Mode and Effect Analysis (FMEA) dengan mengukur Severity, Occurrence dan Detection dari hasil penyebabnya sehingga di dapat nilai Risk Priority Number (RPN). Penelitian yang dilakukan di awal bulan hingga akhir bulan 2019 di dapat nilai rata-rata availability ratio 99%, performance 71%, dan quality rate 99%. Nilai OEE yang di dapat yaitu 69% tidak sebanding dengan nilai standar OEE yang sudah ditetapkan oleh perusahaan kelas dunia sebesar 85%. Tidak tercapainya nilai OEE dikarenakan 4 penyebab utama seperti rendahnya kemampuan pekerja (orang), Umur Mesin, Penjadwalan pemeliharaan mesin dan standar mesin, tempat perakitan tidak sesuai karena rendahnya tentang upaya pembelajaran terkait pemeliharaan mesin extruder 160 (Metode) dan komponen mesin yang tidak sesuai dengan spesifikasi (Material). Didapat hasil Risk Priority Number (RPN) teratas sebanyak 294 pada faktor mesin.Downloads
References
Borris, S. 2006. Total Productive Maintenance. New York: McGraw-Hill
Fitriadi, F., Muzakir, M., & Suhardi, S. 2018. Integrasi Overall Equipment Effectiveness (OEE) Dan Failure Mode and Effect Analysis (FMEA) Untuk Meningkatkan Effectifitas Mesin Screw Press Di PT. Beurata Subur Persada Kabupaten Nagan Raya. Jurnal Optimalisasi, Vol. 4(2)
Firdaus, H., & Widianti, T. 2015. Failure Mode and Effect Analysis (FMEA) sebagai tindakan pencegahan pada kegagalan pengujian. Jurnal Lembaga Ilmu Pengetahuan Indonesia, ISSN 1907-7459
Gaspersz, V. 2003. Metode Analisis untuk Peningkatan Kualitas, Jakarta: Gramedia Pustaka Utama
Hasibuan, M. 2012. Manajemen Sumber Daya Manusia. Jakarta: PT Bumi Aksara
Hasrul, H., Shofa, M. J., & Winarno, H. 2017. Analisa Kinerja Mesin Roughing Dengan Menggunakan Metode Overal Equipment Effectiveness (OEE) dan Failure Mode Effect Analysis (FMEA). Jurnal INTECH Teknik Industri, Vol. 3(2)
Rahman, A., & Perdana, S. 2019. Analisis Produktivitas Mesin Percetakan Perfect Binding Dengan Metode OEE Dan FMEA. Jurnal Ilmiah Teknik Industri, Vol. 7(1)
Rakesh, R., Jos, B. C., & Mathew, G. (2013). FMEA Analysis for Reducing Breakdowns of a Sub System in the Life Care Product Manufacturing Industry. International Journal of Engineering Science and Innovative Technology. Vol. 2(2)
Rizkia, I., Adianto, H., & Yuniati, Y. 2015. Penerapan Metode Overall Equipment Effectiveness (Oee) Dan Failure Mode And Effect Analysis (Fmea) Dalam Mengukur Kinerja Mesin Produksi Winding Nt-880n Untuk Meminimasi Six Big Losses. Jurnal Online Institut Teknologi Nasional, Vol. 3(4)
Saiful, S., Rapi, A., & Novawanda, O. 2014. Pengukuran Kinerja Mesin Defekator I Dengan Menggunakan Metode Overall Equipment Effectiveness (Studi Kasus pada PT. Perkebunan XY ). Jurnal Teknik Industri, Vol. 2(2)
Tannady, H. 2015. Pengendalian Kualitas. Yogyakarta: Graha Ilmu
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
