Design of Shoes Production Tool
DOI:
https://doi.org/10.22441/ijiem.v6i2.28641Kata Kunci:
Design, Production tools, Fixture, NIDAAbstrak
This research was conducted on MSMEs that produce shoes and the like. Some production processes are carried out manually, which has an impact on employee occupational health. The uppersole installation process takes a long time with manual work which is certainly less effective because the position of the shoe changes and produces many unnecessary movements to position the shoe, impacting the condition of workers who experience several complaints such as pain in the thighs, back, and hands. This study aims to design a work aid for installing shoe uppersoles so that they can work effectively and avoid fatigue due to work positions. The design was carried out using the NIDA method. The results of the fixture design show that the fixture is able to withstand 12 directions of object movement, so that the processed upper sole can be maintained in a stationary state and no longer requires repeated positioning efforts. The results of this design can simplify the work process from previously 19 processes with a total time of 62 minutes to 15 processes with a total time of 54 minutes.Unduhan
Referensi
Adji Sasongko, D., & Purnomo, H. (2018). Work System Design Analysis and Improvement Using the Participatory Ergonomics Approach to Reduce Musculoskeletal Disorder Complaints and Risk Exposure at a Workshop Unit. International Journal of Ergonomics (JEG), 8(1), 9.
Ali Ashgar, S. K., Gungat, L., Mohd Sarman, A., & Bolong, N. (2025). Comparative Analysis of BIM Tools and Manual Practices in Enhancing Energy Efficiency for Achieving a Sustainable Campus. International Journal of Built Environment and Sustainability, 12(2), 59–69. https://doi.org/10.11113/ijbes.v12.n2.1394
Amalia Yunia Rahmawati. (2020). Peningkatan Produktivitas Pembuatan Keripik Salak Pondoh dengan Menggunakan Mesin Pengupas Kulit Salak. July, 1–23. https://eprints.upnyk.ac.id/23999/1/26. 34.pdf
Badoozadeh, E., Arefi, M. F., & Babaei-Pouya, A. (2021). Job safety risk assessment in the printing industry using job safety analysis method and offering control recommendations. Pakistan Journal of Medical and Health Sciences, 14(4), 1785–1789. https://pjmhsonline.com/2020/oct_dec/1785.pdf
Basager, A., Williams, Q., & Johnson, H. (2020). A User-Centered Ergonomic Keyboard Design To Mitigate Work-Related Musculoskeletal Disorders. Prasanna Mahajan International Journal of Ergonomics (IJEG), 10, 27.
Dawson, M. K., & Aparicio, I. (2018). Influence of additive to bulk viscosity ratio on inline blending in laminar flow. Chemical Engineering Research and Design, 134, 434–442.
Elandri, A. (2022). Redesign meja las di cv. cipta karya. 22(2), 51–54.
Fadli Arsi, Gayuh Lemadi, Resy Kumala Sari, Dian Eko Adi Prasetio, N. Y., Hasti Hasanati Marfuah, Riri Nasirly, Anastasia Febiyani, A. B. S., & Wibawa Prasetya, A. W. (2025). Ergonomi Industri (F. Arsi (ed.); 1st ed.). Widina Media
Utama. https://repository.penerbitwidina.com/media/publications/618955-ergonomi-industri-f4652ba9.pdf
IISE. (2021). Industrial and Systems Engineering BoK. https://www.iise.org/details.aspx?id=43631
Kaban, S. I., Dwi Astuti, R., & Pujiyanto, E. (2021). Perancangan Alat Pemotong Label untuk Meminimasi Gerakan Repetitive Pekerja di Industri Jago Jaya Shuttlecock Surakarta. Matrik, 22(1), 65. https://doi.org/10.30587/matrik.v22i1.1527
Komara, A. I., Melinda, I. A., Djawari, M., Ghifari, A., Teknik, J., Manufaktur, P., Program, M., Teknologi, S., & Perkakas, P. (2019). Perancangan Ulang Fixture Komponen Main. Jurnal Teknologi Terapan, 5(September), 64–71. https://jurnal.polindra.ac.id/index.php/jtt/article/view/226/pdf
Mahdi, M. I. (2022). Berapa Jumlah UMKM di Indonesia? DataIndonesia.id. https://dataindonesia.id/industri-perdagangan/detail/berapa-jumlah-umkm-di-indonesia
Nurrachman, A. P., Syahliantina, A., Iqbalnur, M., Rinjani Hananta, S. K., Laksono, P. W., & Damayanti, R. W. (2023). Workbench Design Based on the NIDA Method in The Finishing Stage of Leather Bag Production. 426–434. https://doi.org/10.46254/eu05.20220097
Pratiwi, A. I., Hakim, A., & Santoso, R. Y. (2020). Development of Operation Process Map and Analysis Of Inventory Control Based on Material Requirement Planning in Assembly Line. Journal of Industrial Engineering and Halal Industries 1, 1(1), 30–38. https://doi.org/doi:10.14421/jiehis.1800
Soekarta, R., & Suharsono, S. (2021). Perancangan Penutup Jemuran Otomatis Multifungsi Menggunakan Metode QFD (Quality Fungsional Deploymen). Metode : Jurnal Teknik Industri, 7(2), 79–87. https://doi.org/10.33506/mt.v7i2.1654
UUD 1945. (2019). Undang-Undang Usaha Mikro, Kecil dan Menangah. Pustaka Mahardika, Yogyakarta, 53(9), 1689–1699.
Wibowo, N. A., Nadhira, A. G., Agustina, A., & Zidni, M. I. (2023). Design of Work Facilities in Warehouses and Work Stations for SME Dwarr Leather Cutting Leather. Proceedings of the 3rd Asia Pacific International Conference on Industrial Engineering and Operations Management, Johor Bahru, Malaysia, September 13-15, 2022
(PDF) Design of Work Facilities in Warehouses and Work Stations for SME Dwarr Leather Cutting Leather. Available from: https://www.researchgate.net/publication/377746864_Design_of_Work_Facilities_in_Warehouses_and_Work_Stations_for_SME_Dwarr_Leather_Cutting_Leather [accessed Nov 03 2025]. https://doi.org/10.46254/ap03.20220241
Yuliarty, P., & Wibowo, A. (2019). Tingkat Risiko Pekerja Pada Mesin Piercing Tube Dengan Menggunakan Metode Rapid Entire Body Assessment (Reba) Dan Rapid Upper Limb Assessment (Rula) Di Departemen Press Shop Pt. X. Industri Inovatif : Jurnal Teknik Industri, 9(1), 30–37. https://doi.org/10.36040/industri.v9i1.379
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
