Literature Review of the Application of Total Productive Maintenance (TPM) in various industries in Indonesia
DOI:
https://doi.org/10.22441/ijiem.v2i1.10328Kata Kunci:
Overall Equipment Effectiveness Root Caused Analysis 4M EAbstrak
This research is a literature review from various journals with the theme Total Productive Maintenance which is implemented in various companies in Indonesia. The purpose of this paper is as a means of sharing and learning between companies that can be taken as a brainstorming theme related to machine performance within a company, which may not occur between companies that problems outside of the machine problem. The OEE factor of the machine is one of the parameters that is the goal which results in poor engine performance. The research method is to search journals from various sources that have keywords related to TPM. The number of journals found from 2015 to 2020 was 60 journals which were finally iterated to become 46 journals to be selected for this paper. The concept of Pareto and Root caused Analysis (4M + E) is a helpful tool in concluding the literature review in this paper, while the TPM Pillar will provide a solution guide for each problem that has been summarized in 4M + E which will be classified from each problem to be the solution of the problem. that has been found. The conclusions of this literature review are related to this new card problem which is the focus of attention. It is the result of operator changes associated with the contract system which causes this change to be properly prepared at the time the new operator works. The previous operator's method that has been good needs to be transferred to the operator that will enter. However, this is often a big gap with the preparation of this skill transfer and the fatigue factor of operators who have side jobs, with the proliferation of online-based applications causing business operators to seek additional income so that their main work is neglected.Unduhan
Referensi
Adhiutama, A., Darmawan, R., & Fadhila, A. (2020). Total Productive Maintenance on The Airbus Part Manufacturing. Jurnal Bisnis Dan Manajemen, 21(1), 3–15.
Agustiady, T. K., & Cudney, E. A. (2016). Total Productive Maintenance: Strategies and Implementation Guide (A. Badiru (ed.)). CRC Press. https://books.google.com/books?id=Tev5CQAAQBAJ&pgis=1
Amaruddin, H. (2020). Analisis Penerapan Total Productive Maintenance ( Study Kasus Perusahaan Komponen Automotive ) Analysis of the Application of Total Productive Maintenance ( Case Study of an Automotive Component Company ). Jurnal Ekonomi Manajemen Bisnis, 01(02), 141–148. https://doi.org/DOI: https://doi.org/10.37366/ekomabis.v1i02.46
Aminah, E., & Theresia, L. (2018). Penerapan Teknik Kaizen Untuk Total Productive Maintenance (TPM) di Perusahaan Manufaktur. TECHNOPEX, 212–219.
Anggraini, M., Khikmawati, E., & Widiastuti, H. (2017). Analisis Produktivitas Mesin Press Dengan Pendekatan Overall Equipment Effectiveness ( OEE ) Pada PT . Japfa Comfeed Indonesia Lampung. Jurnal Rekayasa, Teknologi, Dan Sains, 1(2), 132–138.
Anthony, M. B. (2019). Analisis Penerapan Total Productive Maintenance (TPM) Menggunakan Overall Equipment Efectiveness (OEE) Dan Six Big Losses Pada Mesin Cold Leveller PT. KPS. JATI UNIK : Jurnal Ilmiah Teknik Dan Manajemen Industri, 2(1), 29. https://doi.org/10.30737/jatiunik.v2i2.333
Apriatno. (2015). Usulan Penerapan Total Productive Maintenance (TPM) Guna Meningkatkan Kinerja Mesin Elektroplating Di Perusahaan Furnitur Tangerang. Jurnal OE, VII(3), 271–288.
Atul Pandey, S. M. & S. J. (2019). Implemented the Overall Equipment Effectiveness ( OEE ) by the techniques of Total Productive Maintenance ( TPM ) in MSE ’ s - A case study. International Journal of Advance Research, Ideas and Innovations in Technology, 5(1), 503–511.
Bakti, C. S., & Kartika, H. (2019). Analisa Produktivitas Sistem Perawatan Mesin Dengan Metode Overall Equipment Effectiveness (Oee) Di Pt.Ymn. Jurnal Ilmu Teknik Dan Komputer, 3(1), 31. https://doi.org/10.22441/jitkom.2020.v3.i1.004
Bastanta, J., Angin, P., Manurung, E. D., & Siregar, A. H. (2018). Penerapan Total Productive Maintenance dengan menggunakan metode OEE pada turbin uap Type C5 DS II – GVS. Jurnal Energi Dan Manufaktur, 10(1), 29–36.
Dandage, P. R. V, Hajare, P. K., Dhebe, M. V, Lad, A. U., & Pinjari, S. S. (2019). Development of Framework for Effective Implementation of Tpm in Engineering Education Institute. January, 278–283.
Dewanti, G. K., & Putra, M. F. (2019). Perhitungan Nilai Overall Equipment Efectiveness (OEE) Mesin Printing Amplas Kertas. Jurnal Optimasi Teknik Industri, 1(2), 1–5.
Diniaty, D., & Susanto, R. (2017). Analisis Total Produktive Maintenance (Tpm) Pada Stasiun Kernel Dengan Menggunakan Metode Overall Equipment Effectiveness (Oee) Di Pt. Surya Agrolika Reksa. Jurnal Hasil Penelitian Dan Karya Ilmiah, 3(2), 66. https://doi.org/10.24014/jti.v3i2.5561
Firman, F., Thabrani, G., & Violeta, V. P. (2018). Analisis peningkatan kinerja pemeliharaan mesin dengan Total Productive Maintenance (TPM) pada mesin boiler pabrik kelapa sawit PT. Perkebunan Nusantara VI unit usaha Rimbo Dua Tebo-Jambi. Jurnal Kajian Manajemen Bisnis, 1(2302–6359), 555–562. https://doi.org/10.2403/jkmb.10885100
Frima, F. R., Budiasih, E., & Alhilman, J. (2019). Usulan Penerapan Total Productive Maintenance ( Tpm ) Untuk Meningkatkan Efektivitas Mesin Single Needle , Single Needle , Chain Stitch , Dan Zig Zag Menggunakan Metode Overall Equipment Effectiveness ( Oee ) Dan Overall Equipment Cost Loss ( Oecl ) Di Pt. 6(2), 7542–7549.
Hafiz, K., & Martianis, E. (2019). Analisis Overall Equipment Effectiveness (OEE) pada Mesin Caterpillar Type 3512B di PT. PLN (PERSERO) ULPLTD bagan besar PLTD Bengkalis. SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, 13(2), 87. https://doi.org/10.24853/sintek.13.2.87-96
Hairiyah, N., Rizki, R., & Wijaya, R. A. (2019). Analisis Total Productive Maintenance (Tpm) Pada Stasiun Kernel Crushing Plant (Kcp) Di Pt. X. Jurnal Teknologi Pertanian Andalas, 23(1), 103. https://doi.org/10.25077/jtpa.23.1.103-110.2019
Hamdy, M. I., & Pratiwi, Y. D. (2015). Analisa Overall Equipment Effectiveness pada Mesin Breaker. Jurnal Teknik Industri Jurnal Hasil Penelitian Dan Karya Ilmiah, 1(2), 70–74.
Hamid, A., Sewaka, & Purnomo, A. (2018). Analisa Efektivitas Kinerja Mesin Turning Star SB-16 Dengan Metode Total Productive Maintenance ( TPM ) di PT Mitsuba Indonesia. Jitmi, 1(1), 50–63.
Haradito, A., Sabarisman, I., & Anoraga, S. B. (2019). Analisis efektivitas mesin pada divisi pengalengan jamur di pt xyz menggunakan metode overall equipment effectiveness. Jurnal Nasional Teknologi Terapan, 3(1), 71–83.
Haryono, L., & Susanty, A. (2015). Penerapan Total Productive Maintenance Dengan Pendekatan Overall Equipment Effectiveness (OEE) Dan Penentuan Kebijakan Maintenance Pada Mesin Ring Frame Divisi Spinning I Di Pt Pisma Putra Textile. Jati Undip: Jurnal Teknik Industri, 4(4).
Iftari, M. N. (2015). Perbaikan maintenance untuk target availability penyaluran gas dengan pendekatan total productive maintenance di PT Pertamina gas area jawa bagian barat. Jurnal MIX, VI(2), 54–67.
Kholil, M., Maulidina, A. D., & Rimawan, E. (2016). Analisa Total Productive Maintenance terhadap Produktivitas Kapal/Armada Menggunakan Metode Overall Equipment Effectiveness pada PT. Global Trans Energy International. Journal of Industrial Engineering & Management Systems, 9(1), 1–18. https://doi.org/10.30813/JIEMS.V9I1.125
Krisnaningsih, E. (2015). Usulan Penerapan TPM dalam Rangka Peningkatan Efektifitas Mesin dengan OEE sebagai Alat Ukur di PT XYZ. Jurnal PROSISKO, 2(2), 13–26.
Kristono, S. N., & Hudori, M. (2018). Pengukuran Efektivitas Mesin Produksi Besi Bondeck pada Industri Manufaktur dengan Overall Equipment Effectiveness. Jurnal Citra Widya Edukasi, 10(3), 253–258.
Latif, A., & Purnomo, R. (2020). Analisis Total Productive Maintenance (Tpm) Menggunakan Overall Equipment Effectiveness (Oee) Di Pt. Perkebunan Nusantara Vi Ophir. Jurnal Sains Dan Teknologi: Jurnal Keilmuan Dan Aplikasi Teknologi Industri, 19(2), 86. https://doi.org/10.36275/stsp.v19i2.204
Livia, K., & Fewidarto, P. D. (2016). Evaluasi Peningkatan Kinerja Produksi melalui Penerapan Total Productive Maintenance di PT Xacti Indonesia. Jurnal Manajemen Dan Organisasi, 7(1), 32. https://doi.org/10.29244/jmo.v7i1.14067
Magdalena, R., & Ginting, A. P. (2019). ANALISIS PRODUKTIVITAS MESIN SHEATING 3 DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS ( OEE ) PADA PRODUKSI FIBER OPTIC PT VOKSEL ELECTRIC TBK. Jurnal Ilmiah Teknik Industri, 7(2), 120–127.
Mulyo, A. E., & Hermansyah. (2018). Penerapan TPM dengan menggunakan overall equipment effectivenees (OEE) dan six big losses pada mesin reverse osmosis di bagian utility PT. Widatra Bhakti. Journal Knowledge Industrial Engineering, 73–80.
Nurfaizah, U., Adianto, R. H., & Prassetiyo, H. (2014). Rancangan Penerapan Total Productive Maintenance (TPM) Di Bagian Press II PT. XYZ. Jurnal Online Institut Teknologi Nasional, 2(1), 340–353.
Nurprihatin, F., Angely, M., & Tannady, H. (2019). Total productive maintenance policy to increase effectiveness and maintenance performance using overall equipment effectiveness. Journal of Applied Research on Industrial Engineering, 6(3), 184–199. https://doi.org/10.22105/jarie.2019.199037.1104
Nursubiyantoro, E., Puryani, P., & Rozaq, M. I. (2016). Implementasi Total Productive Maintenance (Tpm) Dalam Penerapan Overall Equipment Effectiveness (Oee). Opsi, 9(01), 24. https://doi.org/10.31315/opsi.v9i01.2169
Prabowo, R. F., Hariyono, H., & Rimawan, E. (2020). Total Productive Maintenance (TPM) pada Perawatan Mesin Grinding Menggunakan Metode Overall Equipment Effectiveness (OEE). Journal Industrial Servicess, 5(2). https://doi.org/10.36055/jiss.v5i2.8001
Pradana, Y., Zendrato, R. R., & Wicaksana, B. I. (2013). Penerapan Konsep Total Productive Maintenance pada Mesin Automatic Bottle Filling (Studi Kasus : PT. Guwatirta Sejahtera). Journal of Chemical Information and Modeling, 53(9), 1689–1699. https://doi.org/10.1017/CBO9781107415324.004
Praharsi, Y., Sriwana, I. K., & Sari, D. M. (2015). Perancangan Penjadwalan Preventive Maintenance Pada Pt . Artha Prima Sukses Makmur. Jurnal Ilmiah Teknik Industri, 14(1), 59–65. http://journals.ums.ac.id/index.php/jiti/article/viewFile/624/364
Pratama, H., Sutaarga, O., & Rohman, Z. (2020). Analisis Produktivitas Mesin Body Hydraulic One Stroke 30T Dengan Metode Overall Equipment Effectiveness ( OEE ) Di PT . SEL-SEM Tbk ., Tangerang. Industrial Manufacturing, 5(1), 83–94.
Priyono, S., Machfud, M., & Maulana, A. (2019). Penerapan Total Productive Maintenance (TPM) Pada Pabrik Gula Rafinasi di Indonesia (Studi Kasus: PT. XYZ). Jurnal Aplikasi Bisnis Dan Manajemen, 5(2), 265–277. https://doi.org/10.17358/jabm.5.2.265
Putra, Y. R., & Achmadi, F. (2020). Analisis Penerapan Total Productive Maintenance Pada Industri Pipa Baja. Jurnal Teknologi Dan Manajemen, 1(2), 77–86. https://doi.org/10.31284/j.jtm.2020.v1i2.911
Putri, H. S., & Anwar, S. (2020). USULAN PENERAPAN TOTAL PRODUCTIVE MAINTENANCE DI PT SHINKOBE ENGINEERING PADA MESIN CNC HORIZONTAL MAHO (MH-C 700). Jurnal Inkofar, 3(2252), 58–66. http://www.tjyybjb.ac.cn/CN/article/downloadArticleFile.do?attachType=PDF&id=9987
Rahayu, R. R., & Herdiani, L. (2018). Analisis Perhitungan Overall Equipment Effectiveness (Oee) Guna Mengurangi Six Big Losses Dan Upaya Perbaikan Dengan Pendekatan Kaizen 5S. TIARSIE, 17(2), 14–18. https://movisa.org.mx/images/NoBS_Report.pdf
Rahman, A. (2019). Total Productive Maintenance pada Mesin Cetak Offset Printing SM 102 ZP (Study Kasus di PT. XYZ). STRING (Satuan Tulisan Riset Dan Inovasi Teknologi), 4(1), 48. https://doi.org/10.30998/string.v4i1.3614
Riadi, S., & Anwar, S. (2019). Evaluasi Kinerja Pada Mesin Casting Menggunakan Metode Overall Equipment Effectiveness di PT. Surya Toto Indonesia. JIEMS (Journal of Industrial Engineering and Management Systems), 12(1), 1–10. https://doi.org/10.30813/jiems.v12i1.1531
Rufaidah, A., & Abdillah, J. (2019). Analisis Efektivitas Mesin Expeller Dengan Implementasi Tpm (Total Productive Maintenance) Di Pt.Wilmar Nabati Indonesia Gresik. KAIZEN : Management Systems & Industrial Engineering Journal, 2(2), 76. https://doi.org/10.25273/kaizen.v2i2.5973
Ruslan, M., & Prasmoro, A. V. (2018). Analisis Produktivitas Dengan Metode Overall Equipment Effectiveness (Oee) Pada Mesin kneader. Journal of Industrial and Engineering System (JIES), 1(1), 53–64.
Sahrupi, S., & Juriantoro, J. (2018). Usulan Penerapan Total Productive Maintenance pada Transfer Conveyor 17A. Jurnal Sistem Dan Manajemen Industri, 2(1), 51. https://doi.org/10.30656/jsmi.v2i1.568
Sariyusda, S., Fakhriza, F., & Putra, J. (2016). Analisa Efektivitas Prokdusi Pada Unit Urea I Dengan Menggunakan Metode Total Productive Maintenance (Tpm) Di Pt. Pupuk Iskandar Muda. Jurnal POLIMESIN, 14(1), 37. https://doi.org/10.30811/jpl.v14i1.300
Sulistiardi, O., Dian, D., & Adi, E. (2019). Perbaikan “Overall Equipment Effectiveness” (OEE) pada Line Assembly 3 Di PT. Mesin Isuzu Indonesia. Jurnal Baut Dan Manufaktur, 01(01).
Sulistyo, A. B., & Zakaria, T. (2019). Analisis Overall Equipment Effectiveness Mesin Vertical Roller Mill ( Vrm ) Di PT Cemindo Gemilang. Jurnal Intent, 2(1).
Zohari, A. (2019). Analisa Efektivitas Mesin Steel Calender Menggunakan Metode Total Productive Maintenance ( Tpm ). Jurnal Teknologi Dan Terapan Bisnis, 2(1), 22–33.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
