Optimazion Analysis of Temperature and Fermentation Controlled Chamber (TFCC) with Hybrid System to Control Fermentation on Tape
DOI:
https://doi.org/10.22441/ijiem.v5i3.23373Kata Kunci:
Hybrid system, Optimalization, Control, FermentationAbstrak
The aim of this research is to determine analysis for optimizing tape fermentation using a Temperature and Fermentation Controlled Chamber (TFCC) with a Hybrid System. The resulting numerical model was analyzed using a non-linear differential method using Runge-Kutta. The thing that was analyzed was the change in the rate of yeast concentration, the rate of change in the concentration of ethanol and glucose resulting from the fermentation process. TFCC with Hybrid System Technology is equipped with an automated system accompanied by sensors that detect food quality and can be directly observed through the LCD screen integrated in the device. The research method used is experimental research by designing a tool that can be used to produce/cook fermented foods while monitoring pH, alcohol, glucose levels and temperature levels which are integrated in a set of tools called the TFCC with Hybrid Systems Technology . From the numerical explanation, it can be seen that when t is small, the rate of yeast development in the fermentation process will be small, the number of yeast cells is still small. As a result, the growth rate will be slow. This can be seen from the graph of the increase in X(t) and P(t) as well as the graph of S(t) which is still slow. The greater the time t, the rate of yeast consumption is also greater because the number of yeast cells is also increasing. As a result, the growth rate of ethanol and sugar is also large. This can be seen from the graph of an increase in X(t) and P(t) as well as a graph of a faster decline in S(t). When the maximum consumption rate is reached, then the values of X(t), S(t) and P(t) are constant. The amount of concentration in the resulting ethanol is close to the initial concentration of sugar produced.Unduhan
Referensi
Adyana, P.M.A.Y., Swamardika, I.B.A., & Rahardjo, P. (2015). Rancang Bangun Alat Pendeteksi Kadar Alkohol pada minuman beralkohol menggunakan sensor MQ-3 berbasisA Tmega328. E-Jurnal SPEKTRUM, 2(3), 111-115. https://ojs.unud.ac.id/index.php/spektrum/article/view/20056
Djunaidi, K., Jatnika, H., Ningrum, R.F., Kabidoyo, W.S.C. (2019). Alat pendeteksi dan Monitoring kematangan Tape. Jurnal PETIR, Jurnal Pengkajian dan Penerapan Teknik Informatika, 12(2), 222-230. https://doi.org/10.33322/petir.v12i2.531
Faridah, H.D., & Sari, S.K. (2019). Utilization of microorganism on the development of halal food based on biotechnology. Journal of Halal Product and Research, 2(1):33-43. https://doi.org/10.20473/jhpr.vol.2-issue.1.33-43
Hidayat, N., Padaga, M.C., and Suhartini, S. (2006). Mikrobiologi Industri. Andi Offset: Yogyakarta.
Isnainin, N., Ulum, M., Joni, K. (2020). Rancang Bangun Indikator Berat, Temperatur dan Kadar Alkohol Pada Proses Fermentasi Singkong (Tape) dengan Metode Fuzzy Berbasis Microcontroller Atmega 16. JEECOM, 2(1): 8-14. https://doi.org/10.33650/jeecom.v2i1.1097
Kanino, D. (2019). Pengaruh Konsentrasi Ragi Pada Pembuatan Tape Ketan. Jurnal Penelitian dan Pengembangan Agrokompleks, 2(1), 64-74. https://journal.unhas.ac.id/index.php/jppa/article/view/6545
Lehninger, A.L. (1997). Dasar-dasar Biokimia:
Terjemahan Maggy T. Erlangga: Jakarta.
Nagie, R.K & Saff, E.B. (1993). Fundamental of Differensial Equations and Boundary Value Problems. Addison-Wesley Publishing Company: USA.
Negara, M.K, Wirawan, R., & Qomariyah, N. (2020). Rancang Bangun Sistem Monitoring Gas Alkohol Pada Fermentasi Ketan Berbasis Sensor TGS 2620. ORBITA. Jurnal Hasil Kajian, Inovasi, dan Aplikasi Pendidikan Fisika 6(2), 225-229. https://doi.org/10.31764/orbita.v6i2.3166
Retti, N. (2013). Pengaruh Konsentrasi Ragi Merk NKL terhadap Mutu Tape yang Dihasilkan. Jurnal Teknologi Pertanian, 2(2), 1-11. https://doi.org/10.32520/jtp.v2i2.51
Rofi’i, A., Purnomo, F. E., & Afriansyah, F. L. (2022). Pemodelan Matematika Fermentasi Alkohol Pada Tape Singkong Dengan Monitoring Technology Temperature And Fermentation Controlled Chamber (TFCC). Jurnal Ilmiah Inovasi, 22(3), 277–285. https://doi.org/10.25047/jii.v22i3.3509
Rohan, A. (1992). Teknologi Fermentasi. Arcani: Jakarta.
Yahfoufi, N., Mallet, J.F., Graham, E., & Matar, C. (2018). Role of probiotics and prebiotics in immunomodulation. Current Opinion in Food Science, 20 (April), 82-91. https://doi.org/10.1016/j.cofs.2018.04.006
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
