TINJAUAN DESAIN MASKER VALVE UNTUK PENGGUNAAN NONMEDIS DALAM KONDISI PANDEMI
DOI:
https://doi.org/10.22441/narada.2021.v8.i1.002Keywords:
Mask, Pandemic, Valve Mask, Design, Non-MedicalAbstract
The Covid-19 pandemic which occurred during early 2020 has spawned a new habit for society, called the New Normal. One of these new habits is the use of masks when we are going outside. This new habits cause emergence new variant of mask which inspired by the non-medical use mask, one of which is valve masks. Valve masks are becoming more and more prevalent as this new habits develops. This inspired the author to conduct a review of the valve mask design, the work system of this product, as well as its weaknesses and advantages. Due to this reasons, the author uses a descriptive method in conducting a review of this product. The author selects several samples that represent each type of valve mask.
The results of this study indicate that in general, there are three types of valve mask variants, which are one valve mask, two valve mask, and three valve mask. In principle, the valve working system flows the air unidirectional, thus allowing the regulation of circulating air circulate according to the valve position on the mask. Valve masks are relied on in reducing the incidence of tightness compare to the use of usual mask (masks without valves), but on the other hand, the valve have potential to be an entry and exit door for the Covid-19 virus droplets.
Downloads
References
Carreti, D. M. (2000). Human Factor Model For Mask Designers. Inggris: University of Birmingham.
Desain Produk, Tim Dosen. (2020). Buku Panduan Mata Kuliah Riset Desain. Jakarta: Universitas Mercu Buana.
Hess, R. (2007). The Mask for Noninvasive Ventilation: Principles of Design and Effects on Aerosol Delivery. Amerika Serikat: Boston.
Lee, W. (2018). Ergonomic Evaluation of Pilot Oxygen Mask Designs. The Netherlands: Delft University of Technology.
Muthia, A. (2017). Perancangan Masker Sebagai Alat Pelindung Diri Bagi Pengendara Motor Wanita. Bandung: Universitas Telkom.
WHO. (2020). Anjuran Mengenai Penggunaan Masker Dalam Konteks Covid-19. Jenewa: World Health Organization.
Downloads
Published
How to Cite
Issue
Section
License
A writer who will publish their article in the NARADA Journal of Design and Art agrees to the following conditions:
- The author owns the copyright and grants the rights to NARADA Journal of Design and Art as the party entrusted with publishing the article for the first time simultaneously licensed under the "Creative Commons Attribution-ShareAlike 4.0" License. This makes it possible for other people to share the work with a form of acknowledgment of authorship of the work and initial publication in this journal according to the authorship of the article provided.
- Authors may enter into separate additional contractual agreements for non-exclusive distribution of the published journal version of the work (e.g., posting it to an institutional repository or publishing it in a book) with acknowledgment of initial publication in the NARADA Journal of Design and Art.
- Authors are permitted and asked to post their work online (for example, institutional repositories or on personal websites) after the article publication process. This avoids double publication or multiple submissions which will affect the similarity of writing of the published work.
- In order to maintain the value of originality and similarity of articles sent or submitted. Authors are asked to temporarily remove or hide the original article from other online systems until they receive the results and decisions from the NARADA Journal of Design and Art regarding the decision to publish the article.
- The author, in this case the contributing author (Contributor Author), will be sent a form or letter stating the validity of the scientific work, signed on an IDR 10,000 stamp. Then the author will be asked to send the email to [email protected].
Pemberitahuan Hak Cipta
Seorang penulis yang akan menerbitkan artikelnya dalam NARADA Jurnal Desain dan Seni setuju dengan ketentuan berikut:
- Penulis memiliki hak cipta dan memberikan hak kepada pihak NARADA Jurnal Desain dan Seni sebagai pihak yang diberikan kepercayaan untuk mempublikasi artikelnya pertama kali secara bersamaan dilisensikan di bawah Lisensi "Creative Commons Attribution-ShareAlike 4.0". Hal ini memungkinkan kepada orang lain untuk membagi karya dengan bentuk pengakuan kepengarangan karya dan publikasi awal dalam jurnal ini sesuai dengan penulisan artikel yang diberikan.
- Penulis dapat membuat perjanjian kontrak tambahan yang terpisah untuk distribusi non-eksklusif versi jurnal yang diterbitkan dari karya tersebut (misalnya, mempostingnya ke repositori institusional atau menerbitkannya dalam sebuah buku) dengan pengakuan publikasi awal dalam NARADA Jurnal Desain dan Seni.
- Penulis diizinkan dan diminta untuk mempostingkan karyanya secara online (semisal, repositori institusional atau di situs web pribadi) setelah proses penerbitan artikel, Hal ini menghindari adanya double publikasi atau pengajuan jamak yang akan berpengaruh kepada adanya kesamaan penulisan dari karya yang diterbitkan.
- Demi menjaga nilai orisinalitas dan nilai kesamaan dari artikel yang dikirim atau diajukan. Penulis diminta untuk menghilangkan atau menyembunyikan secara sementara artikel orisinil dari sistem online lain yang sampai mendapatkan hasil nilai dan ketetapan dari pihak NARADA Jurnal Desain dan Seni mengenai keputusan publikasi dari artikel.
- Penulis dalam hal ini penulis kontributor (Contributor Author) akan dikirimkan form atau surat pernyataan keabsahan karya ilmiah, yang ditanda tangani di atas materai 10000. Dan selanjutnya penulis diminta untuk mengirimkan ke email [email protected].
