PERBAIKAN TATA LETAK DAN SISTEM PENYIMPANAN BARANG DI GUDANG FINISH GOODS MENGGUNAKAN METODE CLASS BASED STORAGE
DOI:
https://doi.org/10.22441/pasti.2022.v16i3.009Kata Kunci:
Working Productivity, Goods Storage System, Layout, Class-Based Storage MethodAbstrak
Perusahaan farmasi memiliki peningkatan produksi masa kondisi pandemic covid-19 di gudang pusat logistik barang unit National Distribution Centre (NDC). Gudang penyimpanan unit NDC sering terjadi permasalahan mengakibatkan penyimpanan dan pengiriman produk sering terjadi kendala karena lamanya waktu penyiapan barang. Lamanya waktu pencarian barang menyebabkan jadwal pengiriman mengalami keterlambatan dan produktivitas kerja staf gudang rendah. Tujuan penelitian ini adalah memperbaiki tata letak dan sistem penyimpanan barang agar penempatan barang teratur dan waktu pengambilan barang lebih pendek menggunakan metode Class Based Storage dan pengkelasan produk berdasarkan analisis ABC. Hasil dari penelitian ini adalah perbaikan tata letak dengan menghitung kebutuhan penerimaan dan penyimpanan maksimal barang sebanyak 2.023 pallet dengan penurunan jarak tempuh yang dilakukan sebesar 7,25%. Sedangkan pengkelasan produk dengan kategori kelas A mempunyai persentase nilai kumulatif 37% dari 7 item produk, kelas B nilai kumulatif 30% dari 9 item produk dan kategori kelas C nilai 33% dari 19 item produk.
Unduhan
Referensi
A.Rini, Hastuti,Sofian, & E,Riki. (2021). Model Tata Letak Gudang Penyimpanan Menggunakan Metode Class-Based Storage. Jurnal, Vol. 12, No. 2 (page: 21-30). e-ISSN: 2579-4698.
Atikah., Nindri, G, A. (2015). Alternatif Perbaikan Tata Letak Lantai Produksi Pt. Japfa Comfeed Indonesia Dengan Metode Systematic Layout Planning (Slp). SINERGI Vol. 19, No. 3, 217-226.
Basuki., Hudori, M. (2016). Implementasi Penempatan dan Penyusunan Barang di Gudang Finished Goods Menggunakan Metode Class Based Storage. Malikussaleh Industrial Engineering Journal,Vol 5 No.2, 11-16.
Casban, Nelfiyanti. (2019). Analisis Tata Letak Fasilitas Produksi Dengan Metode FTC dan ARC untuk Mengurangi Biaya Material Handling. Jurnal PASTI , Vol XIII No. 3, 262 – 274.
D. Meldra dan H. M. Purba. Relayout. (2018). Tata Letak Gudang dengan menggunakan metode dedicated storage. Jurnal Rekayasa Sistem Industri, Vol.4, No.1, http://ejournal.upbatam.ac.id/index.php/rsi/article/vie w/813
H. Juliana and N. U. Handayani,(2016). “Peningkatan Kapasitas Gudang Dengan Perancangan Layout Menggunakan Metode Class-Based Storage,” J@ti Undip J. Tek. Ind.
Hidayat MN, Maarif V. (2018). Perencanaan Tata Letak Gudang Menggunakan Metode Class Based Storage-Craftpada Distributor Computer & Office Equipment. Jurnal Evolusi.; 6(2): 36-42.
Hidayati, M, A., Purnomo, H. (2017). Perancangan tata letak gudang produk jadi menggunakan association rule mining di pt.supratik suryamas Yogyakarta. Jurnal PASTI, IX No 2, 117 – 128.
I. Pratiwi, E. Muslimah, A. W. Aqil. (2012). Perancangan Tata Letak Fasilitas Di Industri Tahu Menggunakan Blocplan, Jurnal Ilmiah Teknik Industri, Vol 11 No. 2
Johan, Kartika Suhada. (2018). Usulan Perancangan Tata Letak Gudang Dengan Menggunakan Metode Class-Based Storage (Studi Kasus : PT Heksatex Indah, Cimahi Selatan). Journal.Maranatha.Edu, Vol 1No.1, 52 – 71. DOI : https://doi.org/10.28932/jis.v1i1.989
Johan, Kartika Suhada. (2018). Usulan Perancangan Tata Letak Gudang Dengan Menggunakan Metode Class-Based Storage (Studi Kasus di PT Heksatex Indah, Cimahi Selatan). Journal of Integrated System, 1(1), 52–71. https://doi.org/10.28932/jis.v1i1.989
K,Julio. H,Cundo & P,I Nyoman. (2021). Pengaruh Penerapan Metode Class Based Storage Terhadap Peningkatan Utilitas Gudang di PT Mata Panah Indonesia. Jurnal Manajemen Logistik Vol.1, No1 ,Januari 2021, pp. 1-10. E-ISSN 2621-6442
Karonsih, S. N., Setyanto, N. W., & Tantrika, C. F. M. (2010). Perbaikan Tata Letak Penempatan Barang di Gudang Penyimpanan Material Berdasarkan Class Based Storage Policy. Jurnal Teknik Industri. 345 – 357.
Pinasthika, A. F., Kholisoh, E., Rahmadani, N, A. (2016). Perbaikan Tata Letak Gudang Produk Setengah Jadi CV Harapan Baru Menggunakan Metode Class Based Storage.
Ryzzuansyah, Marwan. (2019). Usulan Perbaikan Tata Letak Gudang Distribusi Dengan Metode Class Based Storage Di PT. X. IESM Journal, Vol. 1 No.2 Agustus 2019. ISSN :2656-4300.
Septiani, W., Dahana, A. E., & Adisuwiryo, S. (2019). Perancangan Model Tata Letak Gudang Bahan Baku Dengan Metode Class Based Storage dan Simulasi Promodel. Jurnal Ilmiah Teknik Industri, 6(2), 106–116. https://doi.org/10.24912/jitiuntar.v6i2.4118
Unduhan
File Tambahan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
