ANALISA PRODUKTIVITAS DENGAN MENGGUNAKAN MODEL PENGUKURAN THE AMERICAN PRODUCTIVITY CENTER (APC) PADA PRODUK ALUMUNIUM SHEET DAN ALUMUNIUM FOIL
DOI:
https://doi.org/10.22441/pasti.2019.v13i2.005Kata Kunci:
Output, Input, Prduktivitas, Profitabilitas, Perbaikan harga, The American Productivity Center (APC)Abstrak
Untuk meningkatkan volume penjualan dan keuntungan, maka perusahaan perlu memantau kinerja perusahaan secara keseluruhan, bukan hanya berdasarkan tingkat profitabilitas namun juga berdasarkan tingkat produktivitas. Produktivitas merupakan perbandingan antara output yang dihasilkan dan input yang digunakan. Penelitian ini bertujuan untuk mengetahui berapa besar tingkat produktivitas yang telah dicapai oleh perusahaan dengan menentukan indeks produktivitas, indeks profitabilitas dan indeks perbaikan harga dengan menggunakan model pengukuran The American Productivity Center (APC). Indeks produktivitas total yang diperoleh pada periode 2017 yaitu 114,252% dengan indeks produktivitas input tenaga kerja, material, energi dan modal masing-masing pada periode 2017 yaitu 116,166%, 113,168%, 120,808%, 115,523%. Indeks profitabilitas total yang diperoleh pada periode 2017 yaitu 110,766% dengan indeks profitabilitas input tenaga kerja, material, energi dan modal masing-masing pada periode 2017 yaitu 128,903%, 103,246%, 129,615%, 125,563%. Indeks perbaikan harga dari tahun 2016 ke tahun 2017 diperoleh indeks perbaikan harga tertinggi pada input tenaga kerja yaitu 1,110% dan indeks perbaikan harga terendah pada input material yaitu 0,912%, indeks perbaikan harga energi dan modal masing-masing yaitu 1,073% dan 1,087%. Besar kecilnya indeks perbaikan harga dipengaruhi oleh biaya input yang digunakan untuk menghasilkan sejumlah output.
Unduhan
Referensi
Adedoyin R. A. and Benjamin O. A. 2015. Total Productivity at Firm Level: A Case Study
of a steel Manufacturing Company in Osun State, Nigeria. International Journal of
Engineering Innovation & Research, Vol. 4(1), 192-196.
Akinnuli B. O., Eugene C. Kalu-Imo1. and Anakobe J. Y. 2018. Computer Aided System
for Manufacturing Industries. Computer Aided System for Manufacturing
Industries Economic Production Status Determination. 5, 1-14.
Ardheanne, Chikititha, Nasir W.S., & Ceria Farela M.T. 2014. Analisis Produktivitas.
Analisis Produktivitas Melalui Pendekatan The American Productivty Center
Model (Studi Kasus PT. Sang Hyang Seri (Persero) Kantor Regional III Malang).
-195.
Bakar A., Onguela S. dan Yoanita Y. 2017. Usulan Peningkatan Produktivitas Berdasarkan
Metode Mundel Dan Apc di PT. Raffsya Media. Journal of Industrial Engineering
Management, Vol.2(2), 1-13.
Daghani R., Mohammadali N. and Mostafa A. K. 2012. Productivity, New Paradigm for
Management, Accountant and Business Environment. International Journal of
Business and Management, 6(6), 247-262.
Gaspersz, V. 2000. Manajemen Produktivitas Total: Strategi Peningkatan Produktivitas
Bisnis Total. Jakarta: Gramedia Pustaka Utama.
Gupta R. and S. K. D. 2012. Development Of A Productivity Measurement Model For Tea
Industry. Journal of Engineering and Applied Sciences, Vol. 5(12), 16-25.
Hasibuan, dan Malayu, S.P. 2008. Organisasi & Motivasi: Dasar Peningkatan
Produktivitas. Jakarta: Bumi Aksara.
Jalal, Abdul dan Helvi K. 2016. Analisis Produktivitas Pembuatan Kain Grey dengan
Pendekatan Metode APC dan CD. Analisis Produktivitas Pembuatan Kain Grey
dengan Pendekatan Metode American Productivity Center dan Cobb-Dougla. Vol.
(4), 239-251.
Kusumawati V.Y., Imam S. dan Sudarminto S.Y. 2014. Analisis Kontribusi Teknologi Dan
Produktivitas. Analisis Kontribusi Teknologi Dan Produktivitas Di PT. Surya Jaya
Tulungagung. Vol. 5(2), 37-43.
Mangkuprawira, Sjafri, & Aida Vitayala Hubeis. 2007. Manajemen Mutu Sumber Daya
Manusia. Bogor: Ghalia Indonesia.
Nath A. K. and Ajoy K. D. Productivity Analysis of Black Tea Production in Tea Industry.
International Journal of Research in Mechanical Engineering & Technology, Vol.
(1), 11 -15.
Oktiarso T. dan Rudy S. 2014. Implementasi Metode The American Productivity Center
Pada Sistem Pengukuran Kinerja Pada Pengusaha Kripik Tempe. Jurnal Nasional
Teknologi Informasi dan Komunikasi, 287-292.
Sinungan, Muchdarsyah. 2014. Produktivitas Apa dan Bagaimana. Jakarta: Bumi Aksara.
Sujarweni, V. Wiratama. 2014. Metodelogi Penelitian. Yogyakarta: Pustaka Baru Press.
Summanth, David J. 1984. Productivity Engineering and Management: Productivity
Measurement in Manufacturing and Service Organization. McGraw-Hill Book
Company.
Syukron, Amin, dan Muhammad Kholil. 2014. Pengantar Teknik Industri. Yogyakarta:
Graha Ilmu.
Yamit, Zulian. 2013. Manajemen Kualitas Produk & Jasa. Yogyakarta: Ekonisia
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
