Analysis of Shoe Upper Product Defect with the Seven Tools and Failure Mode and Effect Analysis (FMEA) Methods in PT. XYZ
DOI:
https://doi.org/10.22441/ijiem.v5i2.22414Keywords:
Defect, Shoe upper, Seven tools, FMEAAbstract
PT XYZ is a company engaged in the manufacturing industry with the production of shoe uppers. In the shoe upper production process, defects such as broken pulltab, mudguard crack, tilted backtab, and false collbar are still found which affect quality. The purpose of this study is to determine the level of defects that most often occur so that it can provide suggestions for improvement to reduce the defects of upper shoe products. The methods used are Seven Tools and Failure Mode and Effect Analysis (FMEA). Seven Tools include check sheets, statistics, histograms, pareto charts, pareto diagrams, scatter diagrams, control diagrams, and fishbone diagrams. Then proceed with FMEA analysis to get suggestions for corrective action. Based on the results of research on Seven Tools, it is known that the most dominant defect in shoe uppers is broken pulltab (38.4%), then mudguard crack (30.64%), tilted backtab (16.49%) and false collbar (14.47%). Based on the results of Failure Mode and Effect Analysis (FMEA) research, it is known that the cause of the highest problem at RPN 288 is unbalanced thread setting. The proposed improvement suggestion is to balance the upper thread tension and lower thread tension of the sewing machine.Downloads
References
Andespa, I. (2020). Analisis Pengendalia Mutu
Dengan Menggunakan Statistical Quality Control (Sqc) Pada Pt.Pratama Abadi Industri (Jx) Sukabumi. E-Jurnal Ekonomi Dan Bisnis Universitas Udayana, 2,129. https://doi.org/10.24843/eeb.2020.v09.i02.p02
Hutabarat, J. (2022). Pengantar Teknik
Industri. MNC Publishing.
Kuswardani, I., Suyastiri, N. M. Y., & Utami,
H. H. (2020). Analysis The Quality Controlof Chicken Egg Products In Persada Farm Argopeni Hamlet Sudimoro Vilage Srumbung Sub-District Magelang District. Jurnal Dinamika Sosial Ekonomi, 21(2), 105–121. 10.31315/jdse.v21i2.3949
Lafeniya, S. D. A., & Suseno, S. (2023).
Pengendalian Kualitas Produk Kain Grey Dengan Metode New Seven Tools Pada PT Djohartex. Jurnal Inovasi Dan Kreativitas (JIKa), 2(2), 46–56. https://doi.org/10.30656/jika.v2i2.6003
Lo, J. J. H. L. H.-W. (2018). A novel multiple-
criteria decision-making-based FMEA model for risk assessment. Applied Soft Computing, 73, 684–696.
Manik, A. (2020). Usulan Perbaikan Kualitas
Menggunakan Statistical Quality Control (SQC) dan Fuzzy Failure Mode And Effect Analysis (FMEA) Untuk Meningkatkan Kualitas Produk Seng di PT. Intan Nasional Iron Industri. Skripsi. Jurusan Teknik Industri. Fakultas Teknik. Universitas Sumatera Utara. Medan.
Mislan., Purba, H, H. (2020). Quality Control of
Steel Deformed Bar Product using Statistical Quality Control (SQC) and Failure Mode and Effect Analysis (FMEA). IOP Conf. Ser.: Mater. Sci. Eng. 1007 012119. doi:10.1088/1757-899X/1007/1/012119
Mulia, N. A. C. (2022). Pengendalian Kualitas
Pengelasan Menggunakan Metode Statistical Quality Control (SQC) Dan Failure Mode Effect Analysis (FMEA) Di PT. PAL Indonesia. 1–23. Skripsi. Jurusan Teknik Industri. Fakultas Teknik. Universitas Pembangunan Nasianal Veteran Jawa Timur. Surabaya.
Sari, R. P., & Puspita, D. (2018). Analisis
Tingkat Kecacatan Produk Lever Assy Parking Brake Menggunakan Metode Statistical Quality Control (SQC). JIEMS (Journal of Industrial Engineering and Management Systems), 11(2), 77–83. https://doi.org/10.30813/jiems.v11i2.1184
Suwandi, A., Zagloel, T. Y., & Hidayatno, A.
(2020). Minimization of pipe production defects using the fmea method and dynamic system. International Journal of Engineering Research and Technology, 13(5), 953–961.
https://doi.org/10.37624/ijert/13.5.2020.953-961
Wicaksono, N. A. (2018). Pengendalian
Kualitas Produk Baju Kerja Perawat Untuk Meminimasi Jumlah Produk Cacat Dengan Metode Seven Tools Studi Kasus CV. Laras Mitra Sejati. Skripsi. Program Studi Teknik Industri. Fakultas Teknologi Industri. Universitas Islam Indonesia.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
