Analysis of Work Posture and Risk of Musculoskeletal Complaints of Loading-Unloading Workers Using the REBA Method at PT. XYZ
DOI:
https://doi.org/10.22441/ijiem.v5i1.21878Kata Kunci:
Musculosceletal disorders, Safety and health, Manual handling, REBAAbstrak
PT XYZ is an airport manager in Indonesia engaged in the business of development, trade and services, and genuine estate. In the manual transportation of goods, extreme positions are still carried out. So that complaints of pain appear in several parts of the body, such as the neck, back, upper arms, and legs. The purpose of this study was to determine musculoskeletal complaints and analyze the work posture of workers. Risk assessment using the Rapid Entire Body Assessment (REBA) method because it can provide a more detailed evaluation of the level of risk of work posture as a whole. Based on the results of risk assessment research using the REBA method, workers in the Loading-Unloading Apron Area squatting position get a work posture risk value of 9, and the Apron Area standing position gets a work posture risk value of 8, where the value includes action level 4. For workers in the Loading-Unloading Makeup Area, the bending position gets a work posture risk value of 11, where the value consists of action level 4. Suggestions for improvement that can be proposed are making changes to the position of work postures and designing assistive devices.Unduhan
Referensi
Alifiana, M. A., Sokhibi, A., & Lusianti, D. (2021). Analisis Potensi Risiko Postur Kerja Pembatik Pada Umkm Muria Batik Kudus. Jurnal Rekayasa Sistem Industri, 6(2), 90–94. https://doi.org/10.33884/jrsi.v6i2.3665
Andriani, M., & Erfani, E. (2017). JISI : Jurnal Integrasi Sistem Industri Volume 4 No 2 Agustus 2017 Perancangan Ulang Egrek Yang Ergonomis Untuk Meningkatkan Produktivitas Pekerja Pada Saat Memanen Sawit. 4(2), 119–128. https://doi.org/10.24853/jisi.4.1.pp-pp
Anthony, M. B. (2020). Analisis Postur Pekerja Pengelasan Di CV. XYZ dengan Metode Rapid Entire Body Assessment (REBA). JATI UNIK : Jurnal Ilmiah Teknik Dan Manajemen Industri, 3(2), 110. https://doi.org/10.30737/jatiunik.v3i2.844
Aras, A. F., Rahmatika, D., & Putra, E. (2019). Perancangan Meja Laptop Portable Yang Ergonomis Untuk Penyandang Cerebral Palsy Dengan Pendekatan Antropometri. Jurnal Inovator, 2(1), 16–19. https://doi.org/10.37338/ji.v2i1.35
Ashary Aznam, S., Mardi Safitri, D., & Dwi Anggraini, R. (2017). Ergonomi Partisipatif Untuk Mengurangi Potensi Terjadinya Work Related Musculoskeletal Disorders. Jurnal Teknik Industri, 7(2), 94–104. https://doi.org/10.25105/jti.v7i2.2213
Atuna, V., & Safirin, M. T. (2023). Analysis of Employee Work Posture with the Quick Exposure Check ( QEC ) and Rapid Entire Body Assessment ( REBA ) Method (Case Study : CV. Wijaya Mandiri Label). Journal of Industrial Engineering and Management. 4(3), 448–454. https://doi.org/10.22441/ijiem.v4i3.21369
Atmojo, E. B. T. (2020). Analisis Nordic Body Map Terhadap Proses Pekerjaan Penjemuran Kopi Oleh Petani Kopi. Jurnal Valtech, 3(1), 30–33.
Fikri, S., & Nugraha, A. E. (2022). Usulan Perancangan Alat Bantu Perpindahan Barang yang Ergonomis Dari Stasiun Kerja Mesin Shearing ke Mesin Bending di PT.XYZ. Jurnal Serambi Engineering, 7(4), 3933–3940. https://doi.org/10.32672/jse.v7i4.4635
Hutabarat, D. I. Y. (2017). Dasar Dasar Pengertahuan Ergonomi (Vol. 21, Issue 1).
Meliani, D. A. S. S., Indonesia, S.H., Harkitasari, S. (2022). Hubungan antara Sikap Kerja dengan Keluhan Musculoskeletal Disorders pada Pekerja Angkut Barang Toko Grosir Komodo di Denpasar. Aesculapius Medical Journal, 2(3), 161–165.
Montororing, Y. D. R. (2021). Perancangan Fasilitas Alat Bantu Kerja Dengan Prinsip Ergonomi Pada Bagian Penimbangan Di Pt. Bpi. Jurnal Inkofar, 1(2), 47–57. https://doi.org/10.46846/jurnalinkofar.v1i2.175
Purnomo, H. (2017). Manual Materials Handling. Physical and Biological Hazards of the Workplace, 33–52. https://doi.org/10.1002/9781119276531.ch3
Restuputri, D. P. (2017). Metode REBA Untuk Pencegahan Musculoskeletal Disorder Tenaga Kerja. Jurnal Teknik Industri, 18(1), 19–28. https://doi.org/10.22219/jtiumm.vol18.no1.19-28
Simanjuntak, R. A., & Susetyo, J. (2022). Penerapan Ergonomi Di Lingkungan Kerja Pada UMKM. Dharma Bakti, 5(1), 37–46. https://doi.org/10.34151/dharma.v5i1.3917
Tamala, A. (2020). Pengukuran Keluhan Musculoskeletal Disorders (Msds) Pada Pekerja Pengolah Ikan Menggunakan Nordic Body Map (NBM) Dan Rapid Upper Limb Assessment (RULA). Journal of Chemical Information and Modeling, 4(20), 144–148.
Zetli, S., Fajrah, N., & Paramita, M. (2019). Perbandingan Data Antropometri Berdasarkan Suku. Jurnal Rekayasa Sistem Industri. 5(1), 23–34. https://doi.org/10.33884/jrsi.v5i1.1390
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
