KAJIAN KEKUATAN BAMBU LAMINASI SEBAGAI BAHAN BANGUNAN DI INDONESIA
Keywords:
Analisis struktur, Bambu laminasi, Bahan bangunanAbstract
Saat ini telah banyak penelitian mengenai bambu laminasi sebagai bahan baku alternatif pengganti kayu untuk bahan bangunan, namun belum ada standar perhitungan untuk konstruksi bambu sebagai komponen struktur. Hasil perhitungan menggunakan standar konstruksi kayu tersebut kemudian dibandingkan dengan kajian pustaka penelitian bambu laminasi secara eksperimental. Ruang lingkup perbandingan meliputi kekuatan tarik dan kekuatan tekan. Selain itu, menggunakan beban merata dibandingkan pula kekuatan terhadap lentur dan geser serta lendutan. Hasil yang diperoleh memperlihatkan bahwa kekuatan bambu pada pustaka yang digunakan selalu melebihi perhitungan menggunakan standar konstruksi kayu. Hal ini menunjukkan standar konstruksi kayu boleh digunakan untuk perhitungan konstruksi bambu laminasi. Selain itu, bambu Dendrocalamus asper yang umum dijumpai di Indonesia sangat berpotensi untuk dikembangkan menjadi bambu laminasi yang diproduksi masal menggantikan bambu Guadua agustifolia Kunt.Downloads
References
Agus., Suzanna, Ayu Karunia. 2011. Pengaruh Pengempaan Terhadap Kuat Lentur Balok Laminasi Bambu Betung. Poli Rekayasa Volume.6 Nomor.2 :89-94.
Badan Standarisasi Nasional. 2013. Spesifikasi desain untuk konstruksi kayu. SNI 7973:2013.
Correal, Juan F., Echeverry, Juan S., Ramírez, Fernando.,Yamín, Luis E. 2014. Experimental Evaluation of Physical and Mechanical Properties of Glued Laminated Guadua Angustifolia Kunth. Construction and Building Materials 73. Elsevier Ltd: 105–12.
Departemen Pekerjaan Umum.1991. Spesifikasi ukuran kayu untuk bangunan rumah dan gedung. SNI 03-2445-1991
Nurdiah, Esti Asih. 2016. The Potential of Bamboo as Building Material in Organic Shaped Buildings. Procedia - Social and Behavioral Sciences 216 (2016) : 30–38.
Putri R, Ratih. 2012. Keberterimaan Masyarakat Terhadap Inovasi Teknologi Bambu Laminasi Sebagai Alternatif Pengganti Kayu Konstruksi. Jurnal Sosek Pekerjaan Umum, Vol.4 No.1, April 2012 : 15–22.
Setyo H, Nor Intang ., Satyarno, Iman., Sulistyo, Djoko., and Prayitno, T A. 2014. Sifat Mekanika Bambu Petung Laminasi. Dinamika Rekayasa Vol.10 No.1 : 6–13.
Suryana, Jajang., Massijaya, Muhammad Y., Hadi ,Yusuf S., Hermawan, Dede. 2011. Sifat-Sifat Dasar Bambu Lapis. Jurnal Ilmu dan Teknologi Kayu Tropis Vol.9 No.2 Juli 2011 : 153–165.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
